Yet another Accusump Install - but different

[LAP1DOUG]

Originally Posted by steved0x

Bumping up an older thread, I was checking this out and it looks like the oil filter barely hangs down below the bottom of the oil pan. Is it just the angle of this photo? How far down does it hang?

Thanks

Steve

Hey Steve, yes, in that view the oil filter did project slightly below the pan. As I recall, I was using the large version of the NAPA Gold filter at the time that L&N was recommending (actually a Corvette oil filter I believe).

I never had any problem with the long filter, but have since changed to using the L&N aluminum filter housing with the washable filter. That filter does not project below the oil pan.