Go Back   986 Forum - The Community for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > DIY Project Guides

Post Reply
 
LinkBack Thread Tools Display Modes
Old 03-28-2017, 12:27 AM   #1
Registered User
 
oldskool73's Avatar
 
Join Date: May 2015
Location: Sydney, Australia
Posts: 335
Quote:
Originally Posted by itskenallen View Post
Problem is they're not lighting fully at all, even with the ignition on and the headlights off.
I'd not connect that wire to anything yet then, take the headlights completely out of the equation, just connect the controller to the battery and the red & black wires to the DRL and see if they light fully. If they still don't light fully you have a faulty drl and/or controller.

Also, looks to me like in the image you attached they have mislabeled the wires. Looks like the one labeled 'DRL negative' is a white wire in a black sheath, from all the controllers I've seen it's normally a white wire that should be connected to the headlights for the dimming function. And the one marked 'Headlight / dashboard light' looks like the black negative wire that should be going to the DRL. If you've followed the labelling in that image, it's possible you have those 2 swapped around, which would blow the fuse and/or cause them not to light.
oldskool73 is offline   Reply With Quote
Old 03-28-2017, 02:50 AM   #2
Registered User
 
itskenallen's Avatar
 
Join Date: May 2016
Posts: 115
Quote:
Originally Posted by oldskool73 View Post
I'd not connect that wire to anything yet then, take the headlights completely out of the equation, just connect the controller to the battery and the red & black wires to the DRL and see if they light fully. If they still don't light fully you have a faulty drl and/or controller.

Also, looks to me like in the image you attached they have mislabeled the wires. Looks like the one labeled 'DRL negative' is a white wire in a black sheath, from all the controllers I've seen it's normally a white wire that should be connected to the headlights for the dimming function. And the one marked 'Headlight / dashboard light' looks like the black negative wire that should be going to the DRL. If you've followed the labelling in that image, it's possible you have those 2 swapped around, which would blow the fuse and/or cause them not to light.
Yiu could possibly be right. I thought that wiring diagram was very strange too. Maybe that is the issue. Maybe I've blown the controller now because of that.

Here's the link to the controller I got so u can see for yourself it's wiring.

Look at this on eBay http://www.ebay.co.uk/itm/281928002375

Last edited by itskenallen; 03-28-2017 at 02:53 AM.
itskenallen is offline   Reply With Quote
Post Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 12:26 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page