Go Back   986 Forum - The Community for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Performance and Technical Chat

Post Reply
 
LinkBack Thread Tools Display Modes
Old 09-23-2012, 09:25 AM   #1
Moderator
 
Join Date: Feb 2012
Location: DFW
Posts: 782
Garage
Update: I just finished installing my pipes yesterday. The driver's side went on without a problem but I noted that the passenger's side required some adjustment in order to make it fit. Overall it feels I have gained 5-7hp at a conservative stance, and exhaust note is more colorful at full throttle. I was sent out a pair of duplicate passenger sides, but got the correct set last Friday.
Kenny Boxster is offline   Reply With Quote
Old 09-24-2012, 08:10 AM   #2
Vendor
 
delubozparts's Avatar
 
Join Date: Aug 2006
Location: Addison,Texas
Posts: 147
Quote:
Originally Posted by Kenny Boxster View Post
Update: I just finished installing my pipes yesterday. The driver's side went on without a problem but I noted that the passenger's side required some adjustment in order to make it fit. Overall it feels I have gained 5-7hp at a conservative stance, and exhaust note is more colorful at full throttle. I was sent out a pair of duplicate passenger sides, but got the correct set last Friday.

Kenny,

If possible will you please post some installed pictures on the forum ?

Thank you !

Che
__________________
John (Che) Lin
www.topspeedauto.com
http://stores.ebay.com/TOP-SPEED-PRO-1-PERFORMANCE/_i.html?_nkw=porsche+&_cqr=true&_nkwusc=porche&_si d=24549228&_rdc=1
http://www.facebook.com/profile.php?id=100001535057084
delubozparts is offline   Reply With Quote
Old 09-24-2012, 12:40 PM   #3
Registered User
 
dagdisco03's Avatar
 
Join Date: Jul 2012
Location: CT, USA
Posts: 104
Garage
Received mine quickly delivered on Saturday. Installed them by Saturday night and drove 100 miles Sunday. I see no issues with the over all fit. Bend to the factory U pipe to the muffler was off by half the tube width but nothing I couldn't just pull into place by hand. The pictures from the original poster are a full aftermarket system the factory CATs have heat shields and look nothing like what is pictured.

Nothing rubs and I'd say they follow the original path very closely.

The little adapter pipe I'm not sure about. It works but I wish it was all one pipe to the flange. I have a small leak on each side on that adapter pipe that I still need to mess with to seal up.

Overall for the price can't beat it tubing looks nice it was packed great.

For my car with 109K this helped out low end power all the way up to red line feel better. Throttle feels like it has better response. I felt my low end under 2K RPM feels better leaving from stopped. That surprised me I was expecting that I would lose power in the low end. I'm not sure if it has to do with the mileage and my old CATs?

Sound: Just enough for me very mild increase in sound I'd say it brings the exhaust sound up to even with the intake sound. I can hear the muffler now but just the slightest bit.
__________________
2000 Boxster S
dagdisco03 is offline   Reply With Quote
Old 09-25-2012, 09:37 AM   #4
Registered User
 
Join Date: Jun 2012
Location: Frederick MD
Posts: 658
As it turns out I did receive 2 left [driver's] side pipes. Before I had verified that this was the case, Che, having read this thread, sent me an email with instruction if there was an issue. I called and they are shipping the correct pipe to my mechanic with a return shipping label for the duplicate left pipe. I'll report back as things move forward, but so far, Topspeed is doing everything they can to make things right.
shadrach74 is offline   Reply With Quote
Old 09-27-2012, 05:01 AM   #5
Registered User
 
dagdisco03's Avatar
 
Join Date: Jul 2012
Location: CT, USA
Posts: 104
Garage
Here are a couple pictures before and after install. Hard to see much but figured I'd share since there is so much back and forth on what works. To install I only removed the 3 nuts on the flange, 2 nuts sliding coupler and 2 nuts on the hanger off the muffler. Repeat the same on each side of the car. I did not remove the muffler or anything else. I did remove the wheel for easier access to the flange nuts.

Stock

Stock

Top Speed

Top Speed
__________________
2000 Boxster S
dagdisco03 is offline   Reply With Quote
Old 09-27-2012, 09:23 PM   #6
Registered User
 
Karl Nettgen's Avatar
 
Join Date: Sep 2012
Location: Gold Beach, Oregon
Posts: 68
Garage
I thought I should check my pipes before install after reading these posts and just found out I have two passenger side pipes.
__________________
2001 Boxster S Lapis blue, gray leather six speed, IMS upgrade, Navigation and 18's with Pzero's
Karl Nettgen is offline   Reply With Quote
Old 09-27-2012, 09:41 PM   #7
2001 Arctic Silver 2.7
 
tony_fury's Avatar
 
Join Date: Jun 2012
Location: Huntington Beach,CA
Posts: 310
Garage
How can a company that makes after market parts not pair the components in the boxes properly?
Seems they would have a slight amount a quality control before shipping something out the door..
puzzling...
__________________
2001 Boxster - Arctic Silver Metallic
RMS, IMS, 87.5K
tony_fury is offline   Reply With Quote
Old 09-28-2012, 06:23 AM   #8
Registered User
 
dagdisco03's Avatar
 
Join Date: Jul 2012
Location: CT, USA
Posts: 104
Garage
Good to hear Danger I was definitely expecting the placebo effect response. And I felt this livened up the bottom, mid and throttle response significantly. I was pleasantly surprised that's for sure. I was expecting more noise and slightly less power. More noise was quieter then I expected and power was butt dyno approved
__________________
2000 Boxster S
dagdisco03 is offline   Reply With Quote
Old 09-28-2012, 07:13 AM   #9
Vendor
 
delubozparts's Avatar
 
Join Date: Aug 2006
Location: Addison,Texas
Posts: 147
Quote:
Originally Posted by Karl Nettgen View Post
I thought I should check my pipes before install after reading these posts and just found out I have two passenger side pipes.
PM received, correct set replacement on the way along with FedEx return shipping Label. My apologies for our glitch on shipping dept.
__________________
John (Che) Lin
www.topspeedauto.com
http://stores.ebay.com/TOP-SPEED-PRO-1-PERFORMANCE/_i.html?_nkw=porsche+&_cqr=true&_nkwusc=porche&_si d=24549228&_rdc=1
http://www.facebook.com/profile.php?id=100001535057084
delubozparts is offline   Reply With Quote
Old 09-28-2012, 11:24 AM   #10
02 box s
 
Join Date: Sep 2011
Location: alabama
Posts: 226
well i received the second package yesterday, but won't get to open it until sometime this weekend or early next week. hopefully we have everything sorted out this time.

brad
sgt brad is offline   Reply With Quote
Old 09-27-2012, 06:51 AM   #11
Registered User
 
Johnny Danger's Avatar
 
Join Date: Nov 2008
Location: Massachusetts
Posts: 4,810
Garage
Quote:
Originally Posted by dagdisco03 View Post
Received mine quickly delivered on Saturday. Installed them by Saturday night and drove 100 miles Sunday. I see no issues with the over all fit. Bend to the factory U pipe to the muffler was off by half the tube width but nothing I couldn't just pull into place by hand. The pictures from the original poster are a full aftermarket system the factory CATs have heat shields and look nothing like what is pictured.

Nothing rubs and I'd say they follow the original path very closely.

The little adapter pipe I'm not sure about. It works but I wish it was all one pipe to the flange. I have a small leak on each side on that adapter pipe that I still need to mess with to seal up.

Overall for the price can't beat it tubing looks nice it was packed great.

For my car with 109K this helped out low end power all the way up to red line feel better. Throttle feels like it has better response. I felt my low end under 2K RPM feels better leaving from stopped. That surprised me I was expecting that I would lose power in the low end. I'm not sure if it has to do with the mileage and my old CATs?

Sound: Just enough for me very mild increase in sound I'd say it brings the exhaust sound up to even with the intake sound. I can hear the muffler now but just the slightest bit.
What you're experienced was correct. The secondary cats are extremely restrictive (400 to 600 cells depending if they share the same part as a 996). Therefore, by reducing a significant amount of back pressure, along with weight, your vehicle should have definitely felt more responsive.
__________________
Don't worry … I've got the microfilm.
Johnny Danger is offline   Reply With Quote
Post Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 10:28 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page