12-02-2014, 04:54 PM
|
#201
|
|
Registered User
Join Date: Aug 2009
Posts: 1,466
|
Quote:
Originally Posted by seningen
Just curious to see what your post track idle pressures are? I've seen mine drop below 15psi...
I snapped my temp sender post (ugh!!! and I am reordering a sender) so I don't have temp values yet).
Mike
|
To answer your question I see 20 on the head and 25 on the sump.
My biggest problem was the original pressure relief 100PSI. It popped occasionally when the engine is cold UGH!!! finally put in a 125 PSI relief. I had to pull the carpet from the trunk.
__________________
2003 Black 986. modified for Advanced level HPDE and open track days.
* 3.6L LN block, 06 heads, Carrillo H rods, IDP with 987 intake, Oil mods, LN IMS. * Spec II Clutch, 3.2L S Spec P-P FW. * D2 shocks, GT3 arms & and links, Spacers front and rear * Weight reduced, No carpet, AC deleted, Remote PS pump, PS pump deleted. Recaro Pole position seats, Brey crouse ext. 5 point harness, NHP sport exhaust
|
|
|
|
12-04-2014, 01:15 PM
|
#202
|
|
Registered User
Join Date: Jul 2008
Location: austin
Posts: 824
|
Quote:
Originally Posted by jsceash
To answer your question I see 20 on the head and 25 on the sump.
My biggest problem was the original pressure relief 100PSI. It popped occasionally when the engine is cold UGH!!! finally put in a 125 PSI relief. I had to pull the carpet from the trunk.
|
Thanks -- what AN hose sizes are you guys using for oil cooler/accusump/remote filter?
How about for tranny cooler?
Working on circling my Sears catalog....
thanks,
Mike
__________________
Drivers: '15 Panamera Hybrid (wife's), ' 01 996 GT2, 00 Boxster S, '96 993 Çab/Tip (wife's)
Race Cars: '75 911 RSR Replica & '99 Spec Boxster
mike@lonestarrpm.com
|
|
|
|
|
12-04-2014, 02:14 PM
|
#203
|
|
Registered User
Join Date: Aug 2009
Posts: 1,466
|
Mine are size 10 braided stainless. that is 5/8" I believe. Locally available from a speed shop in the area and oddly our PepBoys. They have a good selection of fittings also
__________________
2003 Black 986. modified for Advanced level HPDE and open track days.
* 3.6L LN block, 06 heads, Carrillo H rods, IDP with 987 intake, Oil mods, LN IMS. * Spec II Clutch, 3.2L S Spec P-P FW. * D2 shocks, GT3 arms & and links, Spacers front and rear * Weight reduced, No carpet, AC deleted, Remote PS pump, PS pump deleted. Recaro Pole position seats, Brey crouse ext. 5 point harness, NHP sport exhaust
|
|
|
|
|
12-04-2014, 02:22 PM
|
#204
|
|
Registered User
Join Date: Jul 2008
Location: austin
Posts: 824
|
Quote:
Originally Posted by jsceash
Mine are size 10 braided stainless. that is 5/8" I believe. Locally available from a speed shop in the area and oddly our PepBoys. They have a good selection of fittings also
|
Merci Beaucoup.....
I was guessing -10.... Does PepBoys have the fittings as well?
All my speedshops are on the other side of town and only M-F 10-6 type hours :-(
So I usually have to order and hope I've got it right.
thanks,
Mike
__________________
Drivers: '15 Panamera Hybrid (wife's), ' 01 996 GT2, 00 Boxster S, '96 993 Çab/Tip (wife's)
Race Cars: '75 911 RSR Replica & '99 Spec Boxster
mike@lonestarrpm.com
|
|
|
|
|
12-10-2014, 09:29 PM
|
#205
|
|
Certified Boxster Addict
Join Date: Nov 2010
Location: Los Angeles
Posts: 7,669
|
Here is a video that I was asked to help out with recently for House Automotive in Pasadena, CA.
The video stars me and all three of my cars. 
And yes, that is a real PIWIS. And they have the newer version to work with all of the new cars.
I hope to be expanding my relationship with House Automotive soon...
House Automotive - Tom Stone
__________________
1999 996 C2 - sold - bought back - sold for more
1997 Spec Boxster BSR #254
1979 911 SC
POC Licensed DE/TT Instructor
|
|
|
|
|
12-11-2014, 04:10 AM
|
#206
|
|
Registered User
Join Date: Nov 2012
Location: SW Okla
Posts: 1,115
|
Tom - that's very cool. It's neat to see how much you enjoy your cars and thanks for all the help and advise you give here on the board.
Thanks for all you do here and best of luck in the upcoming track season! 
Rick
__________________
I think I have a Porsche problem...
|
|
|
|
|
12-11-2014, 06:25 AM
|
#207
|
|
Registered User
Join Date: Sep 2009
Location: toronto
Posts: 2,668
|
Hey what happened to the 944 T? Oh and well done video Tom!
__________________
986 00S
|
|
|
|
|
12-11-2014, 07:19 AM
|
#208
|
|
Registered User
Join Date: Dec 2012
Location: FL
Posts: 4,144
|
Cool video!
|
|
|
|
|
12-11-2014, 08:00 AM
|
#209
|
|
Registered User
Join Date: Aug 2009
Posts: 1,466
|
Very nicely done!
__________________
2003 Black 986. modified for Advanced level HPDE and open track days.
* 3.6L LN block, 06 heads, Carrillo H rods, IDP with 987 intake, Oil mods, LN IMS. * Spec II Clutch, 3.2L S Spec P-P FW. * D2 shocks, GT3 arms & and links, Spacers front and rear * Weight reduced, No carpet, AC deleted, Remote PS pump, PS pump deleted. Recaro Pole position seats, Brey crouse ext. 5 point harness, NHP sport exhaust
|
|
|
|
|
12-11-2014, 08:28 AM
|
#210
|
|
Registered User
Join Date: Jun 2012
Location: Bedford, TX
Posts: 2,732
|
Great video Tom, thanks for sharing.
__________________
______________________________________________
2001 Boxster S Lapis Blue
TS Cat Bypass Pipes and exhaust
iPad Mini Dash Install
DEPO Tail Lights
|
|
|
|
|
12-11-2014, 10:18 AM
|
#211
|
|
Registered User
Join Date: Sep 2014
Posts: 116
|
Quote:
Originally Posted by seningen
Thanks -- what AN hose sizes are you guys using for oil cooler/accusump/remote filter?
How about for tranny cooler?
Working on circling my Sears catalog....
thanks,
Mike
|
-10AN for Accusump/remote filter
-8AN for Tranny Cooler.
I use Aeroquip startlite hose rather than braided, as its easier to inspect, easier to work with and saves weight.
|
|
|
|
|
12-11-2014, 05:09 PM
|
#212
|
|
Certified Boxster Addict
Join Date: Nov 2010
Location: Los Angeles
Posts: 7,669
|
Quote:
Originally Posted by jaykay
Hey what happened to the 944 T? Oh and well done video Tom!
|
The 944 Turbo is currently in the shop getting a new engine installed. Expect to pick it up end of next week!
__________________
1999 996 C2 - sold - bought back - sold for more
1997 Spec Boxster BSR #254
1979 911 SC
POC Licensed DE/TT Instructor
|
|
|
|
|
12-11-2014, 07:46 PM
|
#213
|
|
Registered User
Join Date: Jul 2008
Location: austin
Posts: 824
|
Quote:
Originally Posted by thstone
The 944 Turbo is currently in the shop getting a new engine installed. Expect to pick it up end of next week!
|
That's too funny -- just fired up my 951 after an extensive rebuild at the shop last weekend...
However I'll be selling it -- eyeing a Spec Box to go with my 986S track car.
m
__________________
Drivers: '15 Panamera Hybrid (wife's), ' 01 996 GT2, 00 Boxster S, '96 993 Çab/Tip (wife's)
Race Cars: '75 911 RSR Replica & '99 Spec Boxster
mike@lonestarrpm.com
|
|
|
|
|
12-11-2014, 09:18 PM
|
#214
|
|
Damn Yankee
Join Date: Mar 2013
Location: Dallas
Posts: 1,117
|
Quote:
Originally Posted by thstone
The 944 Turbo is currently in the shop getting a new engine installed.
|
So that's what......four engines this year between the spec Boxster and the 944 Turbo?
Your VISA card must be pretty battered by now.
Just sayin'.............
TO
|
|
|
|
12-11-2014, 09:51 PM
|
#215
|
|
Certified Boxster Addict
Join Date: Nov 2010
Location: Los Angeles
Posts: 7,669
|
Quote:
Originally Posted by TeamOxford
So that's what......four engines this year between the spec Boxster and the 944 Turbo?
Your VISA card must be pretty battered by now.
Just sayin'.............
TO
|
My household budget....
__________________
1999 996 C2 - sold - bought back - sold for more
1997 Spec Boxster BSR #254
1979 911 SC
POC Licensed DE/TT Instructor
|
|
|
|
|
12-11-2014, 09:54 PM
|
#216
|
|
Certified Boxster Addict
Join Date: Nov 2010
Location: Los Angeles
Posts: 7,669
|
Quote:
Originally Posted by seningen
That's too funny -- just fired up my 951 after an extensive rebuild at the shop last weekend...
However I'll be selling it -- eyeing a Spec Box to go with my 986S track car.
m
|
Hah! That is pretty funny! Let me know what we're going to fix next...
Sorry to hear that the 951 might go but you'll love a Spec Boxster!
__________________
1999 996 C2 - sold - bought back - sold for more
1997 Spec Boxster BSR #254
1979 911 SC
POC Licensed DE/TT Instructor
|
|
|
|
|
12-11-2014, 10:04 PM
|
#217
|
|
Certified Boxster Addict
Join Date: Nov 2010
Location: Los Angeles
Posts: 7,669
|
Next project is ready to start! Time to replace the transmission due to what seems to be a bad 3rd gear synchro in the original unit. I'll start this weekend.
Big thanks to member Hughes46 (Mike) for the replacement transmission. I promise to .... uh, beat the hell out of it. In a good way.
__________________
1999 996 C2 - sold - bought back - sold for more
1997 Spec Boxster BSR #254
1979 911 SC
POC Licensed DE/TT Instructor
|
|
|
|
|
12-12-2014, 02:37 PM
|
#218
|
|
Registered User
Join Date: Jun 2012
Location: Bedford, TX
Posts: 2,732
|
Quote:
Originally Posted by TeamOxford
So that's what......four engines this year between the spec Boxster and the 944 Turbo?
Your VISA card must be pretty battered by now.
Just sayin'.............
TO
|
I was thinking the same thing. No wonder you did the video, hopefully you are getting a discount!
__________________
______________________________________________
2001 Boxster S Lapis Blue
TS Cat Bypass Pipes and exhaust
iPad Mini Dash Install
DEPO Tail Lights
|
|
|
|
|
12-12-2014, 05:08 PM
|
#219
|
|
Certified Boxster Addict
Join Date: Nov 2010
Location: Los Angeles
Posts: 7,669
|
Quote:
Originally Posted by BruceH
I was thinking the same thing. No wonder you did the video, hopefully you are getting a discount!
|
I haven't had to sell my furniture yet, but...
__________________
1999 996 C2 - sold - bought back - sold for more
1997 Spec Boxster BSR #254
1979 911 SC
POC Licensed DE/TT Instructor
|
|
|
|
|
12-14-2014, 10:25 AM
|
#220
|
|
Registered User
Join Date: Jun 2013
Location: Costa Mesa,CA
Posts: 17
|
Sorry for the delay. Here is the build list for my oil cooler and a picture of it. The fan is actually underneath the cooler and pulls air through a hole in the trunk and exhausts to the street. There is also obviously a cut out in the bottom of the trunk to allow for this.
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is On
|
|
|
All times are GMT -8. The time now is 10:42 PM.
| |
2002 Porsche Boxter S
2001 Porsche Boxster S
1999 Porsche Boxster
1999 Porsche Boxster
1999 Porsche Boxster
1999 Porsche Boxster
2000 Porsche Boxster
1999 Porsche 996 C4
1972 Porsche 914
1984 Porsche 928S
1984 Porsche 928S
1985 BMW 635 Csi
2001 Boxster S
Scarlett
Cadi
Tuesday
Linear Mode
