Go Back   986 Forum - The Community for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Boxster General Discussions

Post Reply
 
LinkBack Thread Tools Display Modes
Old 06-09-2012, 03:00 PM   #1
Certified Boxster Addict
 
Join Date: Nov 2010
Location: Los Angeles
Posts: 7,669
Suspension Upgrade This Week

It took a little longer that I had hoped, but I finally got all of the components for my suspension upgrade pulled together:

1. Bilstein PSS9 Stocks
2. New Upper Front Shock Mounts
3. New Upper Rear Shock Mounts
4. Rear Tarett Anti-Sway Bar
5. Front Porsche 996 GT3 Anti-Sway Bar
6. Rear Tarett Drop Links
7. Front Tarett Drop Links
8. Rear Tarett Toe Links

Total Hardware = $3,350

Installation is being done by Eric (eric523 on several forums) at Hergesheimer Motor Sports in Orange County. I should have the car back by Weds.

Can't wait to get it out on the track!



__________________
1999 996 C2 - sold - bought back - sold for more
1997 Spec Boxster BSR #254
1979 911 SC
POC Licensed DE/TT Instructor
thstone is offline   Reply With Quote
Old 06-09-2012, 04:35 PM   #2
Registered User
 
bar10dah's Avatar
 
Join Date: Aug 2011
Location: Neither here, nor there...
Posts: 458
Awesome!
bar10dah is offline   Reply With Quote
Old 06-09-2012, 04:43 PM   #3
Registered User
 
ChrisZang's Avatar
 
Join Date: Mar 2006
Location: San Carlos, CA 94070
Posts: 1,450
Congrats! Almost the same as my setup (I also have GT3 lower control arms)
Let me know when you have figured out how to setup your car, I am still struggling with the multitude of setup options I have now

To compare setups:
front -2 degree negative camber
rear -2.5 degree negative camber
rear 1/8 degree toe in

front sway bar: in the middle
rear sway bar: 2nd to softest

PSS9:
front 3 (1 is hardest, 9 is softest)
rear 2 (1 click harder than front to compensate for the 46%/54% front/rear weight distribution

Corner balance
LF: 740
RF: 740
LR: 880
RR: 860
__________________
I still wave at Boxsters, but they no longer wave back :-(
2002 Boxster S "Violet" (sold but not forgotten)
2009 Carrera 4S "Kelsey" (current ride)
2015 FIAT 500e "Nikki" my commuter car
ChrisZang is offline   Reply With Quote
Old 06-09-2012, 05:19 PM   #4
Registered User
 
Join Date: May 2011
Location: Miami florida
Posts: 1,591
Quote:
Originally Posted by ChrisZang View Post
Congrats! Almost the same as my setup (I also have GT3 lower control arms)
Let me know when you have figured out how to setup your car, I am still struggling with the multitude of setup options I have now

To compare setups:
front -2 degree negative camber
rear -2.5 degree negative camber
rear 1/8 degree toe in

front sway bar: in the middle
rear sway bar: 2nd to softest

PSS9:
front 3 (1 is hardest, 9 is softest)
rear 2 (1 click harder than front to compensate for the 46%/54% front/rear weight distribution

Corner balance
LF: 740
RF: 740
LR: 880
RR: 860
I'm a nube to track alignment, but isn't the rule of thumb to dial out the rear camber, about 1 deg less than than the front, as close to 0 toe in the front and soft front sway bar, hard rear sway bar?
__________________
Current car

2000 Boxster 2.7l red/black

Previous cars

1973 Opel Manta
1969(?) Fiat 850 Convertible
1979 Lancia Beta Coupe
1981 Alfa Romeo GTV 6
1985 Alfa Romeo Graduate
1985 Porsche 944
1989 Porsche 944
1981 Triumph TR7
1989 (?) Alfa Romeo Milano
1993 Saab 9000
san rensho is offline   Reply With Quote
Old 06-09-2012, 07:58 PM   #5
Certified Boxster Addict
 
Join Date: Nov 2010
Location: Los Angeles
Posts: 7,669
Quote:
Originally Posted by ChrisZang View Post
Congrats! Almost the same as my setup (I also have GT3 lower control arms)
Bingo! I already have the GT3 lower control arms!

I will post my starting settings when I get the car back.
__________________
1999 996 C2 - sold - bought back - sold for more
1997 Spec Boxster BSR #254
1979 911 SC
POC Licensed DE/TT Instructor
thstone is offline   Reply With Quote
Old 06-09-2012, 08:07 PM   #6
Track rat
 
Topless's Avatar
 
Join Date: Nov 2006
Location: Southern ID
Posts: 3,701
Garage
You will like it. Check out how wasted your old struts are when you get them off the car.
__________________
2009 Cayman 2.9L PDK (with a few tweaks)
PCA-GPX Chief Driving Instructor-Ret.
Topless is offline   Reply With Quote
Old 06-09-2012, 08:09 PM   #7
Registered User
 
DFW02S's Avatar
 
Join Date: Nov 2010
Location: DFW
Posts: 381
That's a fantastic set up.
I hope you will post comparative lap times for those of us still on the fence!
Video and Drift box data would be a plus!

Your subjective commentary would be more than welcome too!

I hope you love the new suspension.
DFW02S is offline   Reply With Quote
Old 06-10-2012, 06:04 PM   #8
Registered User
 
ChrisZang's Avatar
 
Join Date: Mar 2006
Location: San Carlos, CA 94070
Posts: 1,450
Quote:
Originally Posted by san rensho View Post
I'm a nube to track alignment, but isn't the rule of thumb to dial out the rear camber, about 1 deg less than than the front, as close to 0 toe in the front and soft front sway bar, hard rear sway bar?
You might be totally right with that and as I said I am noob myself.
So I trusted the advise of my (very experienced) suspension guy.

Our main goal was to dial out understeer, that's why we went with very aggressive front camber. Of course now that I went the camber route to get rid of understeer I have to be careful not to make the rear swaybar too hard , otherwise I could potentially introduce (snap) oversteer.
With my current setup the car has lost all of it's understeer and when reaching the linit tends to (controllable) oversteer a little (which I prefer more than underster).

But as I said I am learning and would love to compare setup data
__________________
I still wave at Boxsters, but they no longer wave back :-(
2002 Boxster S "Violet" (sold but not forgotten)
2009 Carrera 4S "Kelsey" (current ride)
2015 FIAT 500e "Nikki" my commuter car
ChrisZang is offline   Reply With Quote
Old 06-14-2012, 11:17 AM   #9
Certified Boxster Addict
 
Join Date: Nov 2010
Location: Los Angeles
Posts: 7,669
*** Initial Impression Update ***

My initial impressions:
  • PSS9's on full soft are fine for commuting on LA freeways.
  • PSS9's on full hard are way to0 stiff for commuting on LA freeways.
  • Car feels as solid as a brick.
  • The car corners very flat. Huge imrpovement over stock.
  • Corner turn in is quicker and very smooth.
  • Lower ride height looks great.
Set Up:
I asked to have the car setup biased more for the track than for the street but it still had to be livable around town since this is my daily driver.

Front camber: -2.75 deg
Rear camber: -2.0 deg

Front toe: 0.0 deg
Rear toe: +0.5 deg

Ride height: 100mm

Corner weights:
RF: 759 lbs
LF: 701
LR: 856
RR: 795

PSS9 Street: All full soft
PSS9 Track: Front full hard, rear 1-2 clicks from full hard

Of course, these settings may change once I get some track time. I'll post some lap time comparisions as soon as I have the data.
__________________
1999 996 C2 - sold - bought back - sold for more
1997 Spec Boxster BSR #254
1979 911 SC
POC Licensed DE/TT Instructor
thstone is offline   Reply With Quote
Old 08-15-2012, 01:41 PM   #10
Registered User
 
Join Date: Aug 2005
Location: Ohio
Posts: 380
Garage
Question on the PSS9's

To change the settings, do you have to remove the shock or can they be done on the car?
__________________
2013 Boxster S
2006 Boxster--sold
1999 Boxster--sold
MikenOH is offline   Reply With Quote
Old 08-15-2012, 02:41 PM   #11
Registered User
 
Johnny Danger's Avatar
 
Join Date: Nov 2008
Location: Massachusetts
Posts: 4,810
Garage
I'm running a set of PSS-9's (a la 9ff) on my vehicle . In short, this suspension transformed the way my vehicle performed. However, for "street", I can't dial in the coilovers more than 6 in the rear and 7 in front . Anything beyond that, causes my dental work to fall out !
__________________
Don't worry … I've got the microfilm.

Last edited by Johnny Danger; 08-15-2012 at 02:45 PM.
Johnny Danger is offline   Reply With Quote
Old 08-15-2012, 02:44 PM   #12
Registered User
 
Johnny Danger's Avatar
 
Join Date: Nov 2008
Location: Massachusetts
Posts: 4,810
Garage
Quote:
Originally Posted by MikenOH View Post
To change the settings, do you have to remove the shock or can they be done on the car?
The settings are adjusted via a small dial at the base of the coilover . Stiffness is increased according to descending numbers. For example, 10 is the softest , and 1 is the stiffest .
__________________
Don't worry … I've got the microfilm.
Johnny Danger is offline   Reply With Quote
Old 08-15-2012, 04:54 PM   #13
Track rat
 
Topless's Avatar
 
Join Date: Nov 2006
Location: Southern ID
Posts: 3,701
Garage
I'd gladly share my setup numbers but then I would have to hire Danger to kill you all.
__________________
2009 Cayman 2.9L PDK (with a few tweaks)
PCA-GPX Chief Driving Instructor-Ret.
Topless is offline   Reply With Quote
Old 08-15-2012, 05:13 PM   #14
Registered User
 
Johnny Danger's Avatar
 
Join Date: Nov 2008
Location: Massachusetts
Posts: 4,810
Garage
Quote:
Originally Posted by Topless View Post
I'd gladly share my setup numbers but then I would have to hire Danger to kill you all.
I charge by the mile, and the victim (what's left of them any way) pays for travel ! Massachusetts to California = $$$$$$
__________________
Don't worry … I've got the microfilm.
Johnny Danger is offline   Reply With Quote
Old 08-16-2012, 11:22 AM   #15
Certified Boxster Addict
 
Join Date: Nov 2010
Location: Los Angeles
Posts: 7,669
I have run the PSS9's on the street at all settings now. I think that the 9 available settings are more accurately three settings (1-3 = hard, 4-6 = med, 7-9 = soft). I can't tell any difference in between.

F/R soft gives nice ride quality on the street/freeways. Medium F/R is a nice compromise. Hard F/R is great on the track but a little stiff for a daily driver. It seems best to set the fronts where you like them (1, 4, or 7) and then go two numbers higher in the rear (3, 6, or 9).

Of course, your preferences might be different.
__________________
1999 996 C2 - sold - bought back - sold for more
1997 Spec Boxster BSR #254
1979 911 SC
POC Licensed DE/TT Instructor

Last edited by thstone; 08-16-2012 at 11:25 AM.
thstone is offline   Reply With Quote
Old 03-15-2013, 01:30 PM   #16
Registered User
 
jaykay's Avatar
 
Join Date: Sep 2009
Location: toronto
Posts: 2,668
Subscribed

Is there a PSS10 kit variant for the 986 yet?
__________________
986 00S

Last edited by jaykay; 03-15-2013 at 01:32 PM.
jaykay is offline   Reply With Quote
Old 03-16-2013, 02:59 AM   #17
Newb
 
V-Rod's Avatar
 
Join Date: Nov 2012
Location: MA
Posts: 168
Quote:
Originally Posted by thstone View Post
I have run the PSS9's on the street at all settings now. I think that the 9 available settings are more accurately three settings (1-3 = hard, 4-6 = med, 7-9 = soft). I can't tell any difference in between.

F/R soft gives nice ride quality on the street/freeways. Medium F/R is a nice compromise. Hard F/R is great on the track but a little stiff for a daily driver. It seems best to set the fronts where you like them (1, 4, or 7) and then go two numbers higher in the rear (3, 6, or 9).

Of course, your preferences might be different.
That certainly is a nice setup...I am in New England and would like to improve my current (stock) suspension. How does the ride of the PSS9's at the softest setting compare to a new M030 setup?

Obviously, you have already upgraded some of your other suspension parts. I am starting from stock and would like to restore the suspension to better than new. What is the mandatory hit list of parts?
__________________
1999 Boxster Ocean Blue Metallic/Savannah Beige
2001 Harley Davidson Road King w/Ultra Kit Black/Chrome
2004 Jaguar XJ8 Seafrost Metallic Green/Sand
2008 Land Rover LR3 Alaska White/Alpaca
2012 Honda Odyssey Touring Dk Grey/Lt Grey
V-Rod is offline   Reply With Quote
Old 03-16-2013, 10:31 AM   #18
Certified Boxster Addict
 
Join Date: Nov 2010
Location: Los Angeles
Posts: 7,669
I went from OEM stock to PSS9's so I can't say how the PSS9's compare to M030. My guess is that the PSS9's on soft would still feel stiffer than the M030 simply due to the stiffer springs that come with the PSS9's as compared to the M030.

There really is no single mandatory list of parts for a suspension upgrade. First, you have to decide what you want to acheive and what kind of budget you can afford - then you can start looking at what parts will reach those goals and what tradeoffs you might have to make to keep within your budget.

Also, selecting some parts will require that you install other parts to make everything work so there is a bit of a ripple effect that has to be taken into account. A good example of this is the rear adjustable toe arms. They were required on my setup because the PSS9's allow the ride height to be adjusted beyond the point where the stock part can provide sufficient range in toe adjustment to meet my track alignment settings. If someone had a differnent goal, such as no or only occasional track use, then they might be ok with the stock toe arms and save the money that I had spend.

Take your time and learn, learn, learn. Talk to several shops. See what each of them recommends and ask tons of questions. I spent 3 months learning about what I wanted and another 3-4 months pulling all of the parts together (at a price that I was willing to pay). For example, $2,200 for a set of PSS9's seemed high to me so I waited and searched until I found a brand new set available for $1,500.

Here is a ratio chart for the 996 GT-3 front and Tarrett rear sway bars along with M030 that might come in handy:

__________________
1999 996 C2 - sold - bought back - sold for more
1997 Spec Boxster BSR #254
1979 911 SC
POC Licensed DE/TT Instructor

Last edited by thstone; 03-16-2013 at 10:46 AM.
thstone is offline   Reply With Quote
Old 05-08-2013, 10:59 AM   #19
Registered User
 
jaykay's Avatar
 
Join Date: Sep 2009
Location: toronto
Posts: 2,668
Were items 2 and 3 necessary or just a nice to have? Are the tarrett spring adapters needed here?

I am referring to the original post
__________________
986 00S
jaykay is offline   Reply With Quote
Old 05-08-2013, 11:13 AM   #20
Certified Boxster Addict
 
Join Date: Nov 2010
Location: Los Angeles
Posts: 7,669
Due to old age and mileage, items 2 and 3 were necessary on my car. There was no point in upgrading the suspension + having adj lower control arms if the upper shock mounts were going to have a lot of slop. The condition of these and other remaining suspension components will vary by car - replace as required.

The PSS9 shocks are a direct bolt-on - the Tarrett spring adapters are not needed as long as you use the springs that come with the PSS9 shocks. If you use another aftermarket spring, then you might need the spring adapters (depending on the size of the spring).

__________________
1999 996 C2 - sold - bought back - sold for more
1997 Spec Boxster BSR #254
1979 911 SC
POC Licensed DE/TT Instructor
thstone is offline   Reply With Quote
Post Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 02:53 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page