So the build begins...

		986 Forum - The Community for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Boxster General Discussions
So the build begins...

Garage

Post Reply

LinkBack

Thread Tools

Display Modes

Eric G So the build begins... 04-19-2012, 06:46 AM

Topless While you are in there.... a... 04-19-2012, 06:55 AM

Eric G Well, as I begin my project... 07-25-2012, 06:28 PM

Jager So how does someone buy the... 07-25-2012, 07:00 PM

Eric G Give Bill a call and ask him... 07-25-2012, 07:08 PM

Jager Thanks, think I will add one... 07-25-2012, 07:11 PM

thstone Be sure to check the dual... 07-25-2012, 08:02 PM

Eric G I will be servicing the both... 07-26-2012, 03:09 AM

Eric G Well another day and more... 07-29-2012, 06:43 PM

dmairspotter Nice thread. Thanks for... 07-30-2012, 04:13 AM

Eric G Today's target was to remove... 07-30-2012, 06:34 PM

Eric G With all three nuts removed... 07-30-2012, 06:41 PM

Eric G Dug in and finally struck IMS... 07-31-2012, 06:01 PM

Eric G Uncovered the IMS... 07-31-2012, 06:12 PM

Jager Eric, I recommend replacing... 07-31-2012, 06:18 PM

Eric G Good call, I had not thought... 07-31-2012, 06:28 PM

dmairspotter Thanks for the thread. Very... 08-01-2012, 11:29 AM

Eric G A slow day...but a day of... 08-01-2012, 05:19 PM

BruceH Interesting thread! You are a... 08-01-2012, 07:21 PM

feelyx I love threads like this....... 08-01-2012, 07:35 PM

jaykay Eric, Have you been able... 08-01-2012, 07:51 PM

Eric G Feelyx, which bearing? The... 08-02-2012, 06:11 AM

Gilles Eric, you are a very lucky... 08-02-2012, 11:00 AM

Bruce Wayne nice thread eric.. your car... 08-02-2012, 12:57 PM

jaykay Nice so its better than the... 08-03-2012, 01:18 PM

jaykay Nice so its better than the... 08-03-2012, 01:24 PM

feelyx Awesome... Thanks Eric,... 08-02-2012, 06:58 AM

Eric G Why some friends should not... 08-02-2012, 05:24 PM

Eric G I hear this comment...what is... 08-02-2012, 06:20 PM

Eric G Today was a simple day as my... 08-03-2012, 07:59 PM

AndyA6 Eric, thanks for sharing!... 08-04-2012, 06:01 AM

Eric G Andy, your comments are much... 08-04-2012, 06:50 AM

AndyA6 :):D;) Good one! My wife... 08-04-2012, 08:33 AM

rdc8118 Eric, great post, thanks for... 08-04-2012, 09:27 AM

Eric G Not sure if this is going to... 08-04-2012, 10:16 AM

Eric G Sunday morning off to a... 08-05-2012, 02:51 PM

Eric G Well, it has been a few days... 08-08-2012, 06:27 PM

AndyA6 Thanks for the update!... 08-08-2012, 06:51 PM

Eric G Lots accomplished today... 08-10-2012, 04:55 PM

Eric G Last thing for today was the... 08-10-2012, 05:19 PM

Fluellen It's not entirely clear to... 08-11-2012, 08:15 AM

Eric G Fluellen, sorry that seemed a... 08-11-2012, 08:39 AM

Fluellen Yeah, I figured you know what... 08-11-2012, 08:44 AM

Eric G Fluellen I will be glad to. ... 08-11-2012, 04:07 PM

BYprodriver Great work Eric. The nut on... 08-11-2012, 05:42 PM

Eric G Byprodriver, it is the small... 08-11-2012, 05:48 PM

dmairspotter Great thread! Thanks. 08-12-2012, 06:07 AM

Eric G This was a really good day... 08-12-2012, 02:27 PM

Eric G Hardest part about a build is... 08-13-2012, 04:27 PM

AndyA6 Thanks for the update! I... 08-14-2012, 06:49 AM

Eric G Andy, thank you for the kind... 08-14-2012, 08:00 AM

Homeboy981 Good work Eric! I always look... 08-14-2012, 12:20 PM

Eric G Today's update does not come... 08-15-2012, 05:40 PM

Eric G Drawing close to the end... 08-19-2012, 06:55 PM

Eric G For Fluellen as there was a... 08-19-2012, 06:57 PM

dmairspotter Great info! 08-20-2012, 05:25 AM

Homeboy981 Eric G (or should it be 'Gee... 08-20-2012, 02:01 PM

Eric G Homeboy...take the car on... 08-20-2012, 03:06 PM

jcb986 Yikes...are you building a... 08-22-2012, 10:33 AM

Eric G ...almost :) I need to get... 08-23-2012, 05:20 AM

Eric G Well, it took a few days... 08-26-2012, 06:39 PM

Topless Nice to have her all done... 08-26-2012, 07:04 PM

BruceH Outstanding work! Thanks for... 08-26-2012, 07:23 PM

Eric G Been a few years, but she is... 03-08-2019, 01:09 PM

07-30-2012, 04:13 AM	#1
dmairspotter Registered User Join Date: May 2011 Location: Maine, USA Posts: 126	Nice thread. Thanks for posting. Keep it coming!

Post Reply

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is On Trackbacks are On Pingbacks are On Refbacks are On Forum Rules

All times are GMT -8. The time now is 10:18 PM.