Go Back   986 Forum - The Community for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Show and Tell Gallery

View Poll Results: What's Your Thoughts?
Like it 96 100.00%
Hate it 0 0%
Voters: 96. You may not vote on this poll

Post Reply
 
LinkBack Thread Tools Display Modes
Old 03-24-2008, 06:27 PM   #1
Registered User
 
Join Date: Dec 2007
Location: Florida
Posts: 207
Chills,

Here are images of the kit (2-Din housing & brackets, Porsche 986 wire harnesses, antenna adapter, radio removal keys, screws, wire nuts, custom support bracket, heat shield, fascia or faceplate). It will definitely be nice for those that haven't done the install yet to use a kit with photo directions. My brother has his hands in a lot of projects to keep him busy, but he was happy to help me with out with this project.

Last edited by trieullionaire; 03-24-2008 at 07:26 PM.
trieullionaire is offline   Reply With Quote
Old 03-24-2008, 06:33 PM   #2
Registered User
 
Join Date: Dec 2007
Location: Florida
Posts: 207
Talking

The photo instructions is almost completed, just trying to put as much pertinent info on there as possible. I will post it tomorrow if I can, depends on how late I work tonight.
trieullionaire is offline   Reply With Quote
Old 03-24-2008, 10:05 PM   #3
Registered User
 
Join Date: Nov 2006
Location: Bastrop, TX
Posts: 705
I am so going to buy this when it comes out on ebay.
does it work with the factory CDC changer and AMP?
James
__________________
2002 S
Pedro rear stabilizer bar, CF strut braces, Maxspeed headers with 100 cell cats, Fabspeed cat bypass pipes, H&R springs with M030 setup, TRG rear links, EVO air intake, B&M Short shift kit, Raby IMS upgrade, Raby underdrive pulley
jhandy is offline   Reply With Quote
Old 03-25-2008, 01:22 AM   #4
Registered User
 
Join Date: Dec 2007
Location: Florida
Posts: 207
The kit will be on Ebay today but no later than tomorrow is what I was told. My brother is low on the quantity of the faceplates & custom support brackets but has some on order again. He wasn't really anticipating selling more than 100 of these.
trieullionaire is offline   Reply With Quote
Old 03-25-2008, 06:22 AM   #5
Registered User
 
Join Date: Sep 2006
Location: Naperville, IL
Posts: 793
Send a message via Yahoo to Chills
Very cool kit, Tri.

So how much for just the bracket and the heat shield? And I must say the faceplate is pretty sweet. How much for that as well?

Has your brother sold 100 of these already?? That's awesome.
__________________
I bleed green

It's not about the summit, it's about the climb.


http://i133.photobucket.com/albums/q46/chills1138/2.jpg
Chills is offline   Reply With Quote
Old 03-25-2008, 08:16 AM   #6
Registered User
 
Join Date: Dec 2007
Location: Florida
Posts: 207
Chills,

I talked to him last night regarding the kit & what he decided to do was (1) package an entire kit and (2) package a kit with just the fascia or faceplate, custom support bracket & the heat shield for those who have already done the install, but will sell any part(s) that people need. He's still working on the pricing cause the need for kit is relatively low so he can't buy in bulk yet to get a good price. In addition, his dilemma is that the kit has to be reasonable price to move as well. But the guy is an animal, I can't he got rid of most the parts in a matter of a couple of weeks. He's been working with Porsche Clubs & custom shops that is in 200 miles radius from our place. He said he'll have it on Ebay either tonight or tomorrow for people interested.

Trieullionaire
trieullionaire is offline   Reply With Quote
Old 03-25-2008, 08:45 AM   #7
Registered User
 
Join Date: Aug 2007
Location: Chicago suburbs
Posts: 379
Thanks

When he posts it on eBay can you put a note here for the guys waiting. Can you also put some key words to find it on eBay.

On a related note, I need some help finding a wiring harness to connect to the car wiring. I'm on the fence if I'm going to do the Pioneer DVD in this post or a flip up model (I hate the idea of losing my cup holders) - sound and video is more important.

I've been searching eBay and can't find the harness for the head unit. I also need a connector for the amp - I'm planning on swapping that out as well but using the stock wiring. I installed JL Audio 6.5 inch subs in the door already and I'm using the stock wiring for those speakes.

Any help is appreciated.

Thanks,
-Steve
chitowndad is offline   Reply With Quote
Old 03-25-2008, 09:11 AM   #8
Registered User
 
Join Date: Sep 2006
Location: Naperville, IL
Posts: 793
Send a message via Yahoo to Chills
Quote:
Originally Posted by trieullionaire
Chills,

I talked to him last night regarding the kit & what he decided to do was (1) package an entire kit and (2) package a kit with just the fascia or faceplate, custom support bracket & the heat shield for those who have already done the install, but will sell any part(s) that people need. He's still working on the pricing cause the need for kit is relatively low so he can't buy in bulk yet to get a good price. In addition, his dilemma is that the kit has to be reasonable price to move as well. But the guy is an animal, I can't he got rid of most the parts in a matter of a couple of weeks. He's been working with Porsche Clubs & custom shops that is in 200 miles radius from our place. He said he'll have it on Ebay either tonight or tomorrow for people interested.

Trieullionaire
Excellent. Just let me know when he's got the pricing set and I'll send him the money and my shipping address.
__________________
I bleed green

It's not about the summit, it's about the climb.


http://i133.photobucket.com/albums/q46/chills1138/2.jpg

Last edited by Chills; 03-25-2008 at 10:12 AM.
Chills is offline   Reply With Quote
Post Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 02:50 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page