thanks guys; I posted this on the Rennlist 996 forum also since it gets a lot of traffic.
what I'm trying to do is dial out (what I perceive to be) understeer on corner entry and midcorner. It occurred to me that, after installing springs/shocks along with adjustable tie rod ends, I hadn't set my bump steer.
It's PROBABLY not necessary, as the bump steer is probably minor, if anything, and the understeer is likely driver-induced rather than setup. ( I need more practice
)
Additionally, I think my alignment was off (per my home measurement of toe, I had 1/8-3/16" of total front toe out. So I've got some other changes to make as well.
Running a square setup with 255/40/17 RE71R on 8.5" rims all around.
Threaded Mode
