Dreaded SAI/Evap monitors Not ready and P0442

[Gelbster]

If you think it is just the Evap system, this may help
https://www.youtube.com/watch?v=_HwF7t3MUnU

[boxfix]

I had a similar problem and it was a leaking vacuum canister/reservoir and a check valve that fell out of the manifold. you need in the area of 18" Hg in the system for the SAI to work properly.

Make sure you have no vacuum leaks.

Use a vacuum gauge to see what you have.

see: Secondary air pump check valve question

[boxfix]

Originally Posted by Gelbster

If you think it is just the Evap system, this may help
https://www.youtube.com/watch?v=_HwF7t3MUnU

What is he talking about? Maybe he could show us in the engine compartment what he is doing?