Go Back   986 Forum - The Community for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Performance and Technical Chat

 
 
LinkBack Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 12-03-2014, 08:50 AM   #6
Registered User
 
Join Date: Sep 2014
Posts: 116
Both lines from the charcoal canister to the rear of the car can be deleted. You have to plug the intake on the throttle body once you have done this. Leave the one attached to the fuel tank open.

SAI can be completely removed, just rip out all the junk in the image below.



There are two block off plates to block off the ports in the block. You also need to block a vacuum port in the rubber boot on the T

Part numbers are,
996 113 140 53
996 113 340 50
for the plates
and
996 113 233 50
996 113 213 51
for the gaskets.

Other lines under the car to deal with:

Fuel x2
Power steering x2
Heater x2
Coolant x2
Air con x2
Brakes x2
Clutch

Should be obvious what is what once you have a good look.

edit - forgot the radiator breather. That is the small pipe that runs dead center between the main coolant hoses.

Last edited by specboxCO; 12-04-2014 at 03:07 PM.
specboxCO is offline   Reply With Quote
 



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 07:29 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page