if its not one thing its another - top problem now

[schoir]

Originally Posted by ferrytrip1

.....
If I release the pushrods at the v bar so the xmsn does not drive anything will the mechanism go full travel from open to closed - ie the xmsn does not know there is no roof attached so it would just rotate as normal and stop on the limit switches.
....

Thanks, Simon
YNWA

Yes, with all four pushrods disconnected, the V-levers should rotate fully and stop at each of the two limits if the microswitches inside the transmission are functioning properly.

Regards, Maurice.

[ferrytrip1]

The pushrods are off. They look ok, you say they are sprung - they both look solid - neither end moves. I have no access to a vice so must assume they are ok.

When I get a help (early here) for somebody to press the switch while I watch the XMSN I will test the travel.

Thanks

Simon