986 Forum - The Community for Porsche Boxster & Cayman Owners - View Single Post - if its not one thing its another

ferrytrip1 · 05-18-2012, 06:12 AM

Hi, as I was buying the 19mm socket I saw a vernier caliper set for $8 so I bought them, when I measured the distances they were not the same. I set the passenger side to the same as the driver with my drill and tried the roof - works lovely.

Now I have the clamshell pushrods mixedup so not sure which side goes to where.

They are marked "L" & "R". Is this as I look to the rear from the front. So the one marked "L" is on my left?

Thanks

05-18-2012, 06:12 AM	#16
ferrytrip1 Registered User Join Date: Jan 2012 Location: Dubai Posts: 62	Hi, as I was buying the 19mm socket I saw a vernier caliper set for $8 so I bought them, when I measured the distances they were not the same. I set the passenger side to the same as the driver with my drill and tried the roof - works lovely. Now I have the clamshell pushrods mixedup so not sure which side goes to where. They are marked "L" & "R". Is this as I look to the rear from the front. So the one marked "L" is on my left? Thanks