CEL/Maf Cured

[mrjr1000]

Johnny Danger, is your non OEM MAF sensor still working well for you?

CEL and p0102. Purchased new non OEM MAF (not from your supplier). Rough idle and dies but when on the room revs fantastic. No hesitation just torque and go power. Once clutch in rough and sometime dies. Second sensor. First one same problem, returned for another.

Unplug MAF and idles smooth.

As you mentioned, hate to spend $200+ for piece of plastic with couple of components if your's is still doing well for you.

thanks!

[Johnny Danger]

Originally Posted by mrjr1000

Johnny Danger, is your non OEM MAF sensor still working well for you?

CEL and p0102. Purchased new non OEM MAF (not from your supplier). Rough idle and dies but when on the room revs fantastic. No hesitation just torque and go power. Once clutch in rough and sometime dies. Second sensor. First one same problem, returned for another.

Unplug MAF and idles smooth.

As you mentioned, hate to spend $200+ for piece of plastic with couple of components if your's is still doing well for you.

thanks!

I know there are varying degrees of aftermarket maf sensors. However, the one that I picked up was virtually identical to the oem sensor . And, it's performed flawlessly for over a year now .