Porsche Headlight Retrofit [from CAD, prototyping to finish)

[Van914]

Fred,
Get well soon!

[Troy.Boxster]

Wow, glad you are on the mend! Healing wishes sent your way.
-Troy

[jcslocum]

Fred, The highside really does suck! I have been there too without the serious injury to my old body. Get well soonest!

Arte you still accepting order for this kit??

[jb92563]

We were hoping that you didn't visit Thailand again on your vacation due to last times unfortunate incident but hearing that you took up flying with your motorcycle is a nightmare.

Hope you heal up quick and well from your accident.

However, I see racing the Boxster in your future now
Surely it wont be long until you've figured out what else you can race.
If racing is in your blood it will be impossible to not find that alternative adrenaline rush.

[hglaser]

Fred,

So sorry to hear of your mishap. We all wish you a speedy recovery!

Kind regards,

Alex

[mavis.d]

Originally Posted by hglaser

Fred,

So sorry to hear of your mishap. We all wish you a speedy recovery!

Kind regards,

Alex

+1

Get well soon Fred

[tonichristi]

You sure do have some bad luck. Has a bull been through here recently?

[JayG]

Wow Fred!

You have had a sucky year. First Thailand and now this

Glad to hear you are not too badly injured

Best wishes for a speedy recovery

[batshapedheart]

Get well soon Fred!

[RedBeauty]

Some bad News on my projector. Sometime in november one of the angel eyes stopped working. they had only been in the car for about 1,5 months so i feel this was a little short time for those expensive projectors to work.

I have checked and double checked the Connections and that's not the problem.

is there a way to solve this?

I realy liked the angel eye, and that was the biggest reason for me to buy the projectors and give the car the extra awsome look.

I have tryed to PM Fred, but for obvious reasons not gotten any answer. Hopes he get's well soon!
The problem is that the car needs to og to the annual vehicle inspection here in Norway, this month! and the original parking lights wich i'm now using doesn't light bright enough because i've painted the lens black.

[Nine8Six]

Originally Posted by RedBeauty

I have checked and double checked the Connections and that's not the problem.

is there a way to solve this?

Try to rule out the small LED ballast that connect to the parking light by swapping it with the one/side that works. Would be nice if it would only be that. Few failed but we just never know. If indeed the angel eye themselves, I am happy to send you out a replacement bezel assembly if you intent to replace the faulty side one day.

RE inspection. Crazy stuff, sorry to hear your pain there. Idea; can you satisfy your officer by installing a high power 12Vdc LED bulb (temporarily)? I see a 15~30min easy job if you can get the bulb locally.

Mine are also painted black and I am getting plenty of reflection coming out of the stock parking light bulb. I don't have angel eyes in mine so I just kept the oem bulb in there.

Any colors; as long as the surface is smooth, reflection will occur.

[RedBeauty]

Originally Posted by Nine8Six

Try to rule out the small LED ballast that connect to the parking light by swapping it with the one/side that works. Would be nice if it would only be that. Few failed but we just never know. If indeed the angel eye themselves, I am happy to send you out a replacement bezel assembly if you intent to replace the faulty side one day.

RE inspection. Crazy stuff, sorry to hear your pain there. Idea; can you satisfy your officer by installing a high power 12Vdc LED bulb (temporarily)? I see a 15~30min easy job if you can get the bulb locally.

Mine are also painted black and I am getting plenty of reflection coming out of the stock parking light bulb. I don't have angel eyes in mine so I just kept the oem bulb in there.

Any colors; as long as the surface is smooth, reflection will occur.

I tryed to swap the led ballast today. Unfortunateley that did'nt work and now the other side shows the same symphtoms of failing. some of the led's does'nt light up or light as Bright as it should. Again i also checked all the Connections!

[Nine8Six]

@Smallblock454
@BFeller
@PaulE
@BruceH
@Dubaday
@Van914
@Troy
@jcslocum
@jb92563
@hglaser
@mavis.d
@tonichristi
@JayG
@batshapedheart

THANK you for the wishes. You guys are awesome. All getting back in place, I think, slowly, but surely. Persistent headache is gone.... not missing that part. Or perhaps as my wife said "maybe you got used to it" LOL

Drove the Boxster last week only. Fell like I've never driven a Porsche car before. Weird feeling

[PaulE]

Originally Posted by Nine8Six

@Smallblock454
@BFeller
@PaulE
@BruceH
@Dubaday
@Van914
@Troy
@jcslocum
@jb92563
@hglaser
@mavis.d
@tonichristi
@JayG
@batshapedheart

THANK you for the wishes. You guys are awesome. All getting back in place, I think, slowly, but surely. Persistent headache is gone.... not missing that part. Or perhaps as my wife said "maybe you got used to it" LOL

Drove the Boxster last week only. Fell like I've never driven a Porsche car before. Weird feeling

Welcome back Fred! Glad you are on the mend! Hope you are 100% soon!

[kjc2050]

Fred,

Sorry, I haven't checked this thread in a while and was unaware of your accident. Hope you are back to 100% as soon as possible! We all really appreciate everything you've done for the community! Take care and get healthy!!

[particlewave]

That's a failing LED. Nothing you can do except replace the projector bezel.

As I've said before, they need to be on a relay so that they are off when the HIDs are on. You can't have the HIDs and LED angel eyes on at the same time or this will happen sooner or later.
Heat + LED in operation = premature failure.

[BruceH]

Originally Posted by particlewave

That's a failing LED. Nothing you can do except replace the projector bezel.

As I've said before, they need to be on a relay so that they are off when the HIDs are on. You can't have the HIDs and LED angel eyes on at the same time or this will happen sooner or later.
Heat + LED in operation = premature failure.

Charles, for the electrically challenged (me ) can you tell me the exact relay needed? Thanks!

[RedBeauty]

Originally Posted by particlewave

That's a failing LED. Nothing you can do except replace the projector bezel.

As I've said before, they need to be on a relay so that they are off when the HIDs are on. You can't have the HIDs and LED angel eyes on at the same time or this will happen sooner or later.
Heat + LED in operation = premature failure.

Ok. New info for me. I gues as an idea it maybe would be nice to sell the projector set's with this relay in the future ? (where is the relay mounted?)

Originally Posted by Nine8Six

Try to rule out the small LED ballast that connect to the parking light by swapping it with the one/side that works. Would be nice if it would only be that. Few failed but we just never know. If indeed the angel eye themselves, I am happy to send you out a replacement bezel assembly if you intent to replace the faulty side one day.

If you would be so kind to send me the replacement parts Fred, I'll be wery greatfull! (both sides failed). I realy liked the look's of it and meanwhile i'll try to get the car trough inspections with brighter park lightbulbs, I'll cross my fingers but they can realy be a PIA!


Meanwhile here is a picture of how beauty the car is with red on red projectors

[Nine8Six]

^ Nice car!!

Originally Posted by RedBeauty

Ok. New info for me. I gues as an idea it maybe would be nice to sell the projector set's with this relay in the future ? (where is the relay mounted?)

What would be nice (smart?) would be to have them simplified so they become and remain what they truly are "Car headlights with improved light distribution".

I personally don't think the plan will be to include relay harnesses, 1kg of additional wires, and enforcing ppl to do endless connections, adding tapes & soldering, what else fellas really need...

I'll revise the design shortly to make them as I always dreamed of having them. And that is: Elegant, functional, with improved light output. That's it!!! Connect the two little wires to the 12VDC and off you go. Fail-proof. The only maintenance required is to change the Xenon bulbs ($10) every two years (if you like fresh!) and that-is-it.

Sadly this vision of a perfect product does not include angel eyes, LED, additional ballasts to have them light up + all the required backend-electro-copper-can-only-go-wrong-advantages stuff.

They'll be simplified instead - cheaper also (effective today)

[rfuerst911sc]

I had a funny feeling when I ordered mine that the angel eyes option was going to be finicky . Like Fred my vision was just to have the projector lights and that's it . In my opinion mine look great , work great and are simple in design. No slight intended to those that went with angel eyes but the KISS principle is a good one in this application . Just my 2 cents.
Fred keep healing and moving forward .