Spec Boxster Build

[seningen]

Originally Posted by jsceash

I'm not a spec driver But have been using an accusump setup deep sump and stainless windage baffles for almost 3 seasons, Mine is a 2 quart tank. I have data on 2 oil pressure point. One at the tank and the other at the port on the bank 1 head where the pressure switch normally mounts. I do not see pressure below 70 on the tank and 60 on the motor while on track. I am seeing 240-250 degree oil temps. I'm interested in additional oil cooling above the S engine mount cooler.

Just curious to see what your post track idle pressures are? I've seen mine drop below 15psi...

I snapped my temp sender post (ugh!!! and I am reordering a sender) so I don't have temp values yet).

Mike