Go Back   986 Forum - The Community for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Boxster General Discussions

 
 
LinkBack Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 02-09-2018, 02:43 PM   #11
Registered User
 
BYprodriver's Avatar
 
Join Date: Oct 2008
Location: O.C. CA
Posts: 3,709
Garage
Quote:
Originally Posted by Starter986 View Post
1998 Boxster 2.5

118,000

Second owner

Purchased 8.17. Service history unknown. Car looks, operates, runs, and drives like a 9. No noises, creaks, groans, oil consumption, overheating... zero.

In an effort to establish a new "starting point", engine maintenance-wise, I'm preparing to do some preventative maintenance within the next month or so and am reaching out for some insight and direction. In no particular order, yet, I will:

Replace AOS
Replace water pump
Replace spark plugs and tubes
Replace thermostat (low temp)
Replace engine mount
Install under drive pulley

I've read enough on these boards, and viewed enough videos, to be comfortable with these maintenance tasks. Thus, alone I'm confident in pulling it off. Hopefully the same day or over a couple of days. That said...

Is there any particular order in which I should undertake this project? What should I start with... and with what should I end?

Are there any maintenance projects I'm missing to which I should attend "... while I'm in there"? I may have to order more parts.

Aside from the requisite gaskets and seals, is there anything else I should purchase, and associated with those projects, for ..." while I'm in there"? For instance... replace hoses and lines... connections... etc. I may need to order more parts.

Any fluids and filters I should consider while I'm in there? In which order?

Likely I'll be doing this alone, unless otherwise advised.

Any assistance and/or opinion is appreciated. I will be taking notes. Thank you.
Step one to be done during the PPI is remove the oil filter housing & inspect the filter for anything that should not be there.Next remove the oil sump cover & inspect all you can there. If it passes install a LN Engineering full flow spin-on oil filter adapter then change the oil with new oil you have chosen after reading all you can on this forum & Rennlist 996 forum. Do not change the AOS until it shows signs of failing, the new one may be worse than what is on it now.
__________________
OE engine rebuilt,3.6 litre LN Engineering billet sleeves,triple row IMSB,LN rods. Deep sump oil pan with DT40 oil.

Last edited by BYprodriver; 02-09-2018 at 02:47 PM. Reason: more info
BYprodriver is offline   Reply With Quote
 



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 09:36 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page