CDR-220 : AUX for iPhone

[ericinca]

I have this one installed in my 986 and it works great:

BLAU/8-POD2 iPod Adapter for select Blaupunkt Radios :: iPod Adapters & Interfaces :: Discount Car Stereo


Eric

[TerryT]

Originally Posted by ericinca

I have this one installed in my 986 and it works great:

BLAU/8-POD2 iPod Adapter for select Blaupunkt Radios :: iPod Adapters & Interfaces :: Discount Car Stereo


Eric

Thanks Eric.. does this work with the CDR-220 ?

[ericinca]

Terry, it definitely does. I have the CDR-220 in my car.


Eric

[tonycarreon]

so why not this one?

iP-BKR2 iPod Adapter for Becker Radios with "AUX" menu option :: iPod Adapters & Interfaces :: Discount Car Stereo

says for the Becker CDR-220, whereas the other says it's for the Blaupunkt units...

[TerryT]

Originally Posted by ericinca

Terry, it definitely does. I have the CDR-220 in my car.


Eric

Hi Eric,

Just installed the cable ... works great! Thank you.

Installed quick, worked straight out. Hardest part was removing the radio with those tiny removal tools (I think mine are made out of tin).

Cheers
Terry

[ericinca]

Terry, that's great to hear! Enjoy your iTunes!

[jdiba]

Terry, did you have to disconnect the battery or the radio or did you just pull it out
leaving it connected and plug in the adapter ?

Also, did you have to ground the adapter ?

I've never pulled the radio out. Is it attached via a cable or does it just attach to
a plug ? Looking at GreenHeckler's photo tells me it just connects to a port/plug ?

thanks.

[TerryT]

Originally Posted by jdiba

Terry, did you have to disconnect the battery or the radio or did you just pull it out
leaving it connected and plug in the adapter ?

Also, did you have to ground the adapter ?

I've never pulled the radio out. Is it attached via a cable or does it just attach to
a plug ? Looking at GreenHeckler's photo tells me it just connects to a port/plug ?

thanks.

Hi,

I just pulled it out using those special tools (remember to place screwdrivers through the holes of the tools when you get purchase and pull on the screwdrivers, using your fingers alone will be quite painful).
I did not ground it, although it is suggested that you disconnect the battery.. I didn't do it and it worked just fine.
All you need to do is plug it in at the back, and feed the connector to the front.
Also, you will need to 'activate' AUX on your radio by pressing the TP button for a few seconds and selecting AUX to ON from the menu.

Shouldn't take more than a few minutes.

Thanks
Terry