Leaking LN Magnetic Drain Plug!

[piper6909]

Originally Posted by 10/10ths

....When you invest in the LN magnetic drain plug, it comes with instructions. And the instructions are on their web site.

Read the instructions when you buy a new product. Read the owner’s manual in your car. Engineers spent a lot of time and money and blood, sweat, and tears to engineer these things and then write up detailed instructions for their customers to make sure everything works as engineered.

But people are lazy and don’t want to take five minutes to READ.

People will drop $100,000 on a car, and then not take five minutes to read how to care for that car.

Forgive my rant, but I work in the automotive industry, my specialty is technical instruction.

I always ask folks, “If you bought a private jet, would you make sure you knew how to change the oil properly before you flew across the ocean?”

If you can’t take five minutes to read the owner’s manual, and make sure your car doesn’t dump out all its oil on a drive across Montana, then you shouldn’t buy the car.

Harsh? No. Reality? Hell yes.

RTFM.

I’m done. Thanks for your time. Return to your normal programming.

Here's the problem: The owner's manual is useless to those who have an LN plug, because LN specs much lower torques.

So if someone buys a used Box that came with the LN plug, then changes the oil and torques, as you said, to spec in the owner's manual, they will most likely damage the plug. Likewise, if they took it to an indy or quick oil change place that may not necessarily know that LN specs a different torque. Even if they use a torque wrench, they probably would torque it to the spec that their computer tells them, which is derived from the manufacturer's specs, not aftermarket products.

So instead of just blaming the user, you would think LN would have just developed a plug that used similar torque specs as the OE plug.

[1PorscheBoxster986]

For those who are interested in purchasing one, LN is selling the latest revision which has the torque spec and their logo laser etch(not grooved) into their magnetic oil drain plug. It should help solve the problem for you; until the etching eventually wears off . The same one NJbray used.

[piper6909]

Originally Posted by 1PorscheBoxster986

For those who are interested in purchasing one, LN is selling the latest revision which has the torque spec and their logo laser etch(not grooved) into their magnetic oil drain plug. It should help solve the problem for you; until the etching eventually wears off . The same one NJbray used.

Or you can buy the one that uses the same torque as the OE plug and eliminate any chance of someone getting it wrong.

[1PorscheBoxster986]

Originally Posted by piper6909

Or you can buy the one that uses the same torque as the OE plug and eliminate any chance of someone getting it wrong.

I know you're playing devil's advocate here, good job, but in the real world it's 19 ft-lbs to torque the magnetic plugs from LN .

I have never used my magnetic drain plug and the OEM one I use requires 37 ft-lbs still. I've been fortunate to use Frodo's free new crush washers I offered for all my oil changes. I made sure that guy who guarantees the warranty to the work torques down correctly and knows the bolt/screw to use because I hate to go back into a job after I patted myself well done .

[piper6909]

Originally Posted by 1PorscheBoxster986

I know you're playing devil's advocate here, good job, but in the real world it's 19 ft-lbs to torque the magnetic plugs from LN .

I guess you can call it that, but I had to respond when someone automatically lays the entire blame the operator. When in reality the operator may have had no way of knowing that there was an aftermarket plug and broke it when using OE torque specs. Simplest solution? Make the plug withstand the same torque as the OE.

Originally Posted by 1PorscheBoxster986

I have never used my magnetic drain plug and the OEM one I use requires 37 ft-lbs still. I've been fortunate to use Frodo's free new crush washers I offered for all my oil changes. I made sure that guy who guarantees the warranty to the work torques down correctly and knows the bolt/screw to use because I hate to go back into a job after I patted myself well done .

Haha! I get that totally! I hate doing a job twice.