|
If you car is a DD and you'll in need of it:
1. Make a list with all torque values you need. Check that you have all tools you need.
2. Derust all exhaust and other bolts that need to be loosened before you start (i put rust solver on mine for some weeks and cleaned the threads everytime; they were super clean, which helped a lot)
3. Use power tools. If you don't have compressed air, there are also electric tools available. And since you have to loosen and fasten a lot of nuts and bolts this really safes time.
4. Use a lift
I think 2, 3 and 4 saves you up to 50% of time.
Regards, Markus
|
Threaded Mode
