|
You guys are lucky - on R/H drive cars. the switch holding screws are reversed with the slotted head @ the top where you cant see them.......
I'm reasonably small but no way could I get under the dash, see where the screw head slots were orientated to fit the screwdriver (shortend to about 3" long to clear the dash) & then hold a pair of pliers to rotate the scredriver !!
In the end I removed the dash air vent and went in from the top where I could see the screw heads to undo the ignition switch.
Any person with big hands will have a major problem going in from the bottom.....
__________________
2001 Boxster S (triple black). Sleeping easier with LN Engineering/Flat 6 IMS upgrade, low temp thermostat & underspeed pulley.
2001 MV Agusta F4.
|
Threaded Mode
