Go Back   986 Forum - The Community for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Boxster General Discussions

Post Reply
 
LinkBack Thread Tools Display Modes
Old 07-31-2008, 02:41 PM   #1
Bud
Registered User
 
Join Date: May 2008
Location: B.C. Canada
Posts: 7
Thanks for the input, I do have the projector beam on top (for low beam) and the high beam below it. I think it's a bit different then the 986 setup. I imagine the projector makes the beam pattern, not the light source? Anyhoo I'm going to give it a go w/ 6000K bulbs unless some says something will blow up! If anyone has done a 987 just chime in with any advice,

Cheers,

Bud
Bud is offline   Reply With Quote
Old 07-31-2008, 04:32 PM   #2
Registered User
 
Join Date: Jun 2008
Location: New York
Posts: 288
I checked the '07 manual and your car has H7 low beams, so hopefully you bought the right one!

The projector "part" of the head lamp does direct the beam pattern, so if you put a xenon bulb in there I think is should look like a regular xenon head light. One thing I would check out is bulb clearance though. The xenon bulb is a bit longer than the H7 halogen.

And you will most likely have to drill through the rear cover of the headlamp assembly. And it might be smart if you start looking for possible places to mount your ballasts (want them to be dry).

If you want pics of my install and I will gladly take some.
__________________
"If you feel like you're under control, you're just not going fast enough."
-Mario Andretti (cliche!)

2002 Boxster S 6 Speed (Ocean Blue/Savannah)
-De-Snorkled, Porsche (B&M) Short Shifter, EVO Shift Linkage
-H7 HID Upgrade
-Rennwerke Maintained
1998 Bouvier (Brindle)

http://inlinethumb03.webshots.com/42...425x425Q85.jpg
fragdude is offline   Reply With Quote
Old 06-15-2010, 06:56 AM   #3
Registered User
 
Join Date: Jan 2007
Location: Depends on the day of the week....
Posts: 1,400
Quote:
Originally Posted by Bud
Thanks for the input, I do have the projector beam on top (for low beam) and the high beam below it. I think it's a bit different then the 986 setup. I imagine the projector makes the beam pattern, not the light source? Anyhoo I'm going to give it a go w/ 6000K bulbs unless some says something will blow up! If anyone has done a 987 just chime in with any advice,

Cheers,

Bud
Since you already have projector lows, you can do an aftermarket kit, but really try to search around and find a high quality kit, vs the $20 special you'll find on eBay.

Either way, they're still not going to match Litronics.
__________________
Boxster S
Cloudsurfer is offline   Reply With Quote
Old 08-22-2011, 12:09 PM   #4
Registered User
 
Join Date: Mar 2010
Location: canada
Posts: 445
Fuse location?

Sorry to bring this thread back from the dead but instead of starting a new one I was hoping someone could tell me the location of the fuse for the HID lights. I have a pair of after market Bosch H7's and the passenger side is out. It's not the bulb because I checked so if it's not the fuse chances are it's the ballast but I am not sure which is number in the fuse panel the lights are under. Any help would be appreciated thanks.

**Fixed**

Last edited by coolbreeze551; 08-22-2011 at 01:15 PM.
coolbreeze551 is offline   Reply With Quote
Post Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 06:47 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page