|
Hi All,
Just tried to Disconnect the MAF - No changes
Tried to take of the pipe going from the top of the AOS to the intake right after the throttle body-
There was a little oil in the pipe.
I blocked the hole in the intake where the pipe connects, and the engine seemed to start immediately
I guess that the AOS and the pipe going to the intake is a good place to start ?
All my temp readings is from the durametric sw:-)
I have tried to press the pedal all the way down a couple of times before attempting the "cold start " without any changes in the outcome
BR
Kim
|
Threaded Mode
