Any progress on V8 engine swap options?

[specboxCO]

I used this flywheel:

Audi V8 4.2 8 Bolt to O1E/O1A Gearbox | TTV Racing Component Manufacturers

with an Audi S4 B5 clutch friction & Pressure plate. Works on a 986 5 speed and 987 5 & 6 speed boxes.

I had to drill the transmission for the manual crank position sensor and use spacers to get it the correct depth in the bellhousing.

Everything bolted up easily in the end and works great. I like that i'm not using Porsche clutch consumables - much easier on the wallet.

[titaniumdave]

Originally Posted by specboxCO

I used this flywheel:

Audi V8 4.2 8 Bolt to O1E/O1A Gearbox | TTV Racing Component Manufacturers

with an Audi S4 B5 clutch friction & Pressure plate. Works on a 986 5 speed and 987 5 & 6 speed boxes.

I had to drill the transmission for the manual crank position sensor and use spacers to get it the correct depth in the bellhousing.

Everything bolted up easily in the end and works great. I like that i'm not using Porsche clutch consumables - much easier on the wallet.

Thanks, hope to have my bits all trail fit today with the clutch parts.