Rough running (w/Check Engine light) after jump start

[thstone]

You'll need an On Board Diagnostics (OBD-II) electronic code reader. It plugs into the colored connector (my '99 is purple) under the dash just above your left knee. Available at any auto parts store.

Alternatively, any Autozone (and some other auto parts stores) will read the code for you for free. Be sure to get the exact codes (they will start with a P followed by four numbers). Post them here and someone will give you some advice on where to go from there.

[Pjlew63]

Thank you.

Yeah it seems as if water got in the gas.

I'LL BE BACK

PJ

[Pjlew63]

Diagnostic Results
5 Codes
P0300, P0306, P0305, P0301, P0303
Mil on
Monitors
0 Inc

8 Ready
Misfire, Fuel, Comp, Catlyst, Evap, Sec Air, O2 Snsr, O2 Htr

Thank you
PJ

[Pjlew63]

Does the results of my diagnostic readout sound like it will just clear up after driving to allow for self adjustment of the mapping system?