Tell us about your tool

[Gelbster]

Here are a few:
1.Look for a close up of the nose of these pliers. Best way to remove rusty MAF security Torx screws.Made in and supplied from Japan
https://www.amazon.com/gp/product/B001D7KU7W/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1
2. Best way to use Propane to chase Vacuum leaks
https://www.amazon.com/gp/product/B000I1QATQ/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
3. For removing hard to reach 5mm socket heads and other screws.Made in and supplied from Japan:
https://www.amazon.com/gp/product/B002655H5U/ref=oh_aui_detailpage_o06_s00?ie=UTF8&psc=1
The Kobalt listed in a previous Post is good but it is not angled like this.Both are magnetic.
4. For dispensing sealant (like Loctite 5900) in difficult places.May still need to soak the tube in warm water:
https://www.amazon.com/gp/product/B007IQ539C/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
5.Very readable
https://www.amazon.com/gp/product/0837617510/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1
6. The best,cheap,robust .brightest mini Inspection lamp:
https://www.amazon.com/gp/product/B01L64XZVY/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1
7. Great addition to a Power Probe kit
https://www.amazon.com/gp/product/B0029XALXM/ref=oh_aui_detailpage_o06_s00?ie=UTF8&psc=1
8. trim them carefully and use when you really,really do not want to drop a screw/bolt
https://www.amazon.com/gp/product/B00ILLNSY0/ref=oh_aui_detailpage_o07_s00?ie=UTF8&psc=1
9. Gearwrench Insert wrench bit set. The photo is useless sothere are 2 links.Smaller sets are available:
http://www.gearwrench.com/gearwrench-81602-41-pc-master-ratcheting-wrench-insert-bit-set.html
http://www.gearwrench.com/gearwrench-81550-8-pc-metric-hex-ratcheting-wrench-insert-bit-set.html
https://www.youtube.com/watch?v=uSaOKjmSBPs
I'll add more depending on responses.