Go Back   986 Forum - The Community for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > DIY Project Guides

 
 
LinkBack Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 05-06-2014, 09:52 AM   #4
Registered User
 
Join Date: May 2012
Location: Dover,Kent,England
Posts: 78
Another 7kg gone, foam from around the engine bay, left a fair amount of glue
on the body work and was a pig to remove, even using WD40 to break down the glue.

But worth it for a nice clean finish.







Had a quick blast around without the carpet's fitted behind the seats and engine cover, noise level seemed ok nothing to high and light throttle was fine.

There's a fair bit of weigh in the 3 pieces covering the engine, the 2 carpets have a fair amount of foam giving scope to remove it.

Photo of the janspeed fitted.



So i've lost 74kg so far and for the moment that's it, the car has been off the road since the end of september and

it's time i got her back on the road again, so still looking to remove a few more kilos, but over a longer period......

Thought i'd add some weight, did a wrap on the center console came out looking good

thou it did take me around 4 hours



whitecliffs is offline   Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 06:09 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page