Quote:
Originally Posted by truegearhead
Has anyone actually done this on a weld on tip boxster? I tried but the angle of the plate and the distance makes it very difficult.
|
2000 S with welded tips, see post #128. Didn't have much trouble at all.
"Have peeps found that duct tape is the best way to prevent any scratching?... "
The smooth surface of the extension did not leave any discernable marks on edge of the stainless steel tips.
__________________
2000S Ocean Blue Metallic- 116K
3X Water Pump, Clear side markers, Crios Mod, Front engine mount, Flywheel, clutch, RMS, AOS, MAF, serpentine belt, power brake vacuum line, battery, 2X CV boots, Fuel filter, Oil filler tube, 3X ignition switch, 90K service, gas cap, Coolant tank
|
Threaded Mode
