Go Back   986 Forum - The Community for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Boxster General Discussions

Post Reply
 
LinkBack Thread Tools Display Modes
Old 04-09-2016, 07:22 AM   #1
Registered User
 
p3230's Avatar
 
Join Date: Oct 2015
Location: Rockland Ontario
Posts: 208
Garage
I bought my 2003 S with 100000KM on it didn't get any paperwork with it but had a long talk with the owner had a complete checkup of the car done and was safety tested and etested so I know it was mechanically fit. He also told me he had regular maintenance done on the car and oil changes and that was good enough for me. I don't intend also to change anything on the car like IMS AOS water pump thermostat I just intend on driving it that's all and enjoy it.
__________________
Frank
p3230 is offline   Reply With Quote
Old 04-09-2016, 08:02 AM   #2
Registered User
 
thom4782's Avatar
 
Join Date: Sep 2010
Location: Foster City CA
Posts: 1,099
For me, this comes down to two issues

Issue 1: The Bet

IMSB options differ by design and cost. Some designs will probably last longer than others. My own beliefs are these. The IMS Solution has the longest service life and may cause the least collateral damage when it fails. Ceramic bearings likely have the next longest service life and steel bearings have the least. When ceramic or steel ball bearing IMSBs fail, the collateral damage can range from minimal to catastrophic.

Issue 2: The Cost of A Lost Bet

If your handy a turning a wrench, have all the necessary special tools, and have access to what's needed to clean out debris, then your financial risks are lower and the questions whether to replace and what to replace the IMSB with become more difficult to answer. That, however, isn't me. I'd need to shop out the replacement / rebuild and doing so would open a big drain in my wallet at local indie rates. The price tag would be in the $ thousands.

My Decision

I had two goals: keep my 125K mileage car around for a long time and minimize the odds of me paying a large bill if the IMSB failed. I choose the Solution as my bet. Time will let me know if I won.

As for the bearing that came out of my car, it was a single row that looked pristine and didn't wobble. When I opened up the seal, however, it was clear the lubricating grease had washed out. Only the Porsche gods know how much longer it would have lasted.

Good luck...gather as many facts and opinions as you can and try to separate the marketing hype and unfounded opinions from what's real. Hint: if LN bearings failed frequently the boards would be screaming with condemnations. They're not which should tell you something.

Last edited by thom4782; 04-09-2016 at 08:07 AM.
thom4782 is offline   Reply With Quote
Post Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 06:08 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page