Missing Mesh

[kjc2050]

Originally Posted by HereIam

Are they held on by special clips? I don't see any screw holes anywhere. Do they crack? Are they blown off the car? What's failing with these things? Apparently the previous owner replaced them once already, which doesn't inspire confidence in another purchase.

The inserts are molded plastic and include small tabs which clip onto the roll bar hoops. Over time, the tabs become brittle. Also, air pressure can dislodge the inserts. As Dwight mentioned, I put one small black zip tie on each, and haven't had an issue since.

[amitmishra4]

Can you share a picture of where you guys are zip tying it so it's not visible? I'm always nervous about it flying out but I don't want to zip tie it if it's conspicuous.

Originally Posted by kjc2050

The inserts are molded plastic and include small tabs which clip onto the roll bar hoops. Over time, the tabs become brittle. Also, air pressure can dislodge the inserts. As Dwight mentioned, I put one small black zip tie on each, and haven't had an issue since.

[kjc2050]

Here you go. It's not pretty, but it works. Most people would never notice.

[HereIam]

Originally Posted by kjc2050

Here you go. It's not pretty, but it works. Most people would never notice.

This is kinda what I'm thinking. All this needs is a little piping around the edge to give it a more finished look. It might also be cool with a different style mesh, or maybe a metal screen material of some kind.

[gerber28]

Originally Posted by kjc2050

The inserts are molded plastic and include small tabs which clip onto the roll bar hoops. Over time, the tabs become brittle. Also, air pressure can dislodge the inserts. As Dwight mentioned, I put one small black zip tie on each, and haven't had an issue since.

I've used a small piece of double sided 3M tape under the tabs instead of a zip tie.