Go Back   986 Forum - The Community for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Boxster General Discussions

Post Reply
 
LinkBack Thread Tools Display Modes
Old 03-19-2013, 11:44 AM   #1
Homeboy981
 
Homeboy981's Avatar
 
Join Date: Jan 2012
Location: Sherman, TX
Posts: 663
Garage
How Light is Your Flywheel+Clutch?

Samc asked how much the new Aasco lightweight flywheel tipped the scales at and how it compared to the stock weights, this should offer a comparison:

Lightweight Flywheel only - 13.0 lbs.
Lightweight Flywheel + New Sachs Clutch Assembly - 25.4 lbs. *
Stock Dual Mass Flywheel only - 26.5 lbs.
Stock Dual Mass Flywheel only + New Sachs Clutch Assembly - 38.8 lbs.
Lightweight Flywheel + New Sachs 4 Spring Clutch Assembly - 18.0 lbs. **

All I know is the stock FW and clutch were HEAVY! And my engine has to spin that up. Whereas, the LWFW and clutch…I had to check to make sure the clutch was in there! 13.4* to 20** pounds LESS may not seem like a lot, unless you're the engine! One went CLUNK on the scale and the other made a slight noise. I was even able to control it better!

The total weight for the 4 spring clutch AND housing, Throwout bearing, and spacers is only 6 pounds! And that is shipping weight! The 4 spring ZF Sachs clutch is for sale right now for only $357 - shipped! PM me for details.

So maybe you can have the BEST of BOTH worlds…AND the price is right!

Lighter is better AND the Aasco LWFW offers the ability to resurface (for around $100) instead of replacement, which is good. Anyone want an old flywheel?

Funny how all the HEAVY stuff ends up in my garage - now I have a couple boat anchors - flywheel & stock muffler. Now all I have to do is get my car back together and I'll let you know how it goes!

__________________
2002 Porsche Boxtser S - Silver & Chrome - Died from IMS failure AFTER IMS was replaced!
Homeboy981 is offline   Reply With Quote
Old 03-19-2013, 11:59 AM   #2
Registered User
 
Johnny Danger's Avatar
 
Join Date: Nov 2008
Location: Massachusetts
Posts: 4,810
Garage
It will interesting to see how you like it once you drive it ?
__________________
Don't worry … I've got the microfilm.
Johnny Danger is offline   Reply With Quote
Old 03-19-2013, 12:10 PM   #3
Registered User
 
Join Date: Apr 2008
Location: Southern New jersey
Posts: 1,054
Do you have a link to the clutch you're using? It doesn't sound very "street friendly".
stephen wilson is offline   Reply With Quote
Old 03-19-2013, 01:15 PM   #4
Registered User
 
Join Date: Feb 2005
Location: It's a kind of magic.....
Posts: 6,261
Quote:
Originally Posted by Homeboy981 View Post
Funny how all the HEAVY stuff ends up in my garage - now I have a couple boat anchors - flywheel & stock muffler. Now all I have to do is get my car back together and I'll let you know how it goes!
Just be careful you don't end up with another "boat anchor, your engine:



This is out of a factory X51 engine that was switched to a lightweight flywheel, but without fully harmonically balancing the engine (the dual mass flywheel is the only harmonic dampener in the M96/97 engine).
__________________
Anything really new is invented only in one’s youth. Later, one becomes more experienced, more famous – and more stupid.” - Albert Einstein
JFP in PA is offline   Reply With Quote
Old 03-19-2013, 01:46 PM   #5
Homeboy981
 
Homeboy981's Avatar
 
Join Date: Jan 2012
Location: Sherman, TX
Posts: 663
Garage
Quote:
Originally Posted by JFP in PA View Post
Just be careful you don't end up with another "boat anchor, your engine:



This is out of a factory X51 engine that was switched to a lightweight flywheel, but without fully harmonically balancing the engine (the dual mass flywheel is the only harmonic dampener in the M96/97 engine).
OUCH! You sure KNOW how to hurt a guy!

Exactly why I went looking for a clutch with 4 springs, and to reduce the gear lash. Hopefully this will do it…at $357 - IF it works - it is a steal! And I will be driving it like it was stolen but that is a given.

Stephen, here is a link:

Brand New Genuine ZF Sachs Clutch Kit for Porsche Boxster S | eBay

JD, I will interested in JUST DRIVING it once it is off my garage floor!
__________________
2002 Porsche Boxtser S - Silver & Chrome - Died from IMS failure AFTER IMS was replaced!
Homeboy981 is offline   Reply With Quote
Old 03-19-2013, 02:20 PM   #6
Registered User
 
Join Date: Mar 2013
Location: Cary, NC
Posts: 35
Garage
Its not the engagement of the clutch (I assume this is the gear lash you are referring to) you should be concerned with.

The dual-mass flywheel is the only balancing device these engines utilize. With out removing the crankshaft and having it sent to a specialty machine shop to be balanced, you risk the crank assembly vibrating apart at the weakest point (a journal and webbing joint).

That being said, these engines rev SOOO FAST with aluminum flywheels. I think you will enjoy the engine response a lot.

Skoot
Skootnasty is offline   Reply With Quote
Old 03-19-2013, 02:42 PM   #7
Registered User
 
Join Date: Feb 2005
Location: It's a kind of magic.....
Posts: 6,261
Quote:
Originally Posted by Homeboy981 View Post
Exactly why I went looking for a clutch with 4 springs, and to reduce the gear lash.
I think you are mistaking drivability and clutch noise with torsional harmonics. These engines are not particularly well balanced internally, which is why Porsche uses such a heavy two piece flywheel, the elastomer section absorbs those harmonics. Without the dual mass, they are left to their own devices.

We have seen a couple of these failures, Jake has an entire section of his site devoted to them. Porsche even released a TSB about not using single mass flywheels on these engine's, regardless of their weight.

Just food for thought.................
__________________
Anything really new is invented only in one’s youth. Later, one becomes more experienced, more famous – and more stupid.” - Albert Einstein
JFP in PA is offline   Reply With Quote
Old 03-19-2013, 03:34 PM   #8
Rennzenn
 
j.fro's Avatar
 
Join Date: Feb 2005
Location: Virginia
Posts: 1,369
Garage
I've had the Aasco lwfw and a Spec stage 3 plus sprung clutch in my car for 18,000 miles including 40+ autocross events. Street driving requires paying attention to things, but isn't that just part of the experience?
j.fro is offline   Reply With Quote
Old 03-19-2013, 03:35 PM   #9
1999 base
 
Meir's Avatar
 
Join Date: Dec 2011
Location: Coral Springs FL
Posts: 1,617
Garage
Just out of curiusety.
Is there anyone in the forum that runs with a LWFW for segnificant time?
Or suffered a catastrophic failier due to one?
Meir is offline   Reply With Quote
Old 03-19-2013, 03:48 PM   #10
Homeboy981
 
Homeboy981's Avatar
 
Join Date: Jan 2012
Location: Sherman, TX
Posts: 663
Garage
Quote:
Originally Posted by j.fro View Post
I've had the Aasco lwfw and a Spec stage 3 plus sprung clutch in my car for 18,000 miles including 40+ autocross events. Street driving requires paying attention to things, but isn't that just part of the experience?
Interesting response j.fro….what do mean by paying attention EXACTLY?

I know it will rev fast. Do you mean like doing a "rental car ram" thing?
__________________
2002 Porsche Boxtser S - Silver & Chrome - Died from IMS failure AFTER IMS was replaced!
Homeboy981 is offline   Reply With Quote
Old 03-19-2013, 04:41 PM   #11
Rennzenn
 
j.fro's Avatar
 
Join Date: Feb 2005
Location: Virginia
Posts: 1,369
Garage
The car now definitely needs to rev a bit more so that it doesn't stall, but I also don't want to launch like a top fuel dragster. When the car was stock, it didn't take nearly as much attention to just drive away "normally".
j.fro is offline   Reply With Quote
Old 03-19-2013, 07:01 PM   #12
Certified Boxster Addict
 
Join Date: Nov 2010
Location: Los Angeles
Posts: 7,669
Quote:
Originally Posted by Meir View Post
Just out of curiusety.
Is there anyone in the forum that runs with a LWFW for segnificant time?
Or suffered a catastrophic failier due to one?
I've had the LWFW and Sachs sport clutch installed in my car for 33,000 miles and 50+ track days. No problems whatsoever. I'm not an expert, just relaying my personal experience.

And as always, your mileage may vary.
__________________
1999 996 C2 - sold - bought back - sold for more
1997 Spec Boxster BSR #254
1979 911 SC
POC Licensed DE/TT Instructor
thstone is offline   Reply With Quote
Old 03-20-2013, 02:21 AM   #13
Registered User
 
Join Date: Feb 2005
Location: It's a kind of magic.....
Posts: 6,261
Some seem to get away with it for long periods, others not so much. That said, there have been enougn failures to warrant PCNA making mention of it.

Purely a matter of how risk tolerant you may be.
__________________
Anything really new is invented only in one’s youth. Later, one becomes more experienced, more famous – and more stupid.” - Albert Einstein
JFP in PA is offline   Reply With Quote
Old 04-02-2015, 11:06 AM   #14
Registered User
 
seningen's Avatar
 
Join Date: Jul 2008
Location: austin
Posts: 823
Quote:
Originally Posted by JFP in PA View Post
Some seem to get away with it for long periods, others not so much. That said, there have been enougn failures to warrant PCNA making mention of it.

Purely a matter of how risk tolerant you may be.
Any updates on this combination -- thinking about the pros/cons for a
drive to the track car.

Wonder how many of those crank failures were with the original non-sprung clutch?

Mike
__________________
Drivers: '15 Panamera Hybrid (wife's), ' 01 996 GT2, 00 Boxster S, '96 993 Çab/Tip (wife's)
Race Cars: '75 911 RSR Replica & '99 Spec Boxster
mike@lonestarrpm.com
seningen is offline   Reply With Quote
Old 04-03-2015, 11:40 AM   #15
Certified Boxster Addict
 
Join Date: Nov 2010
Location: Los Angeles
Posts: 7,669
Quote:
Originally Posted by thstone View Post
I've had the LWFW and Sachs sport clutch installed in my car for 33,000 miles and 50+ track days. No problems whatsoever. I'm not an expert, just relaying my personal experience.

And as always, your mileage may vary.
I am up to about 62,000 miles and 94 track days and I am on the 2nd clutch (same LWFW) without a problem.

And as always, your mileage may vary.

Maybe I am lucky with clutches and unlucky with valve lifters.
__________________
1999 996 C2 - sold - bought back - sold for more
1997 Spec Boxster BSR #254
1979 911 SC
POC Licensed DE/TT Instructor

Last edited by thstone; 04-03-2015 at 11:43 AM.
thstone is offline   Reply With Quote
Old 04-03-2015, 12:07 PM   #16
Registered Boxster abuser
 
healthservices's Avatar
 
Join Date: Oct 2011
Location: socal
Posts: 1,014
Quote:
Originally Posted by Homeboy981 View Post
Interesting response j.fro….what do mean by paying attention EXACTLY?

I know it will rev fast. Do you mean like doing a "rental car ram" thing?
Quote:
Originally Posted by j.fro View Post
The car now definitely needs to rev a bit more so that it doesn't stall, but I also don't want to launch like a top fuel dragster. When the car was stock, it didn't take nearly as much attention to just drive away "normally".

The reason for the weight itself in the flywheel is the momentum. it keeps things constant. With a heavy weight flywheel it will tend to stay at its rpm when you let out the clutch. With a light weight flywheel, as soon as you let out the clutch there is no mass to keep the rpms where it was. Thus easier to stall a car with a light weight flywheel. This also allows the engine to change rpm quickly (like accelerating)
healthservices is offline   Reply With Quote
Old 04-03-2015, 12:51 PM   #17
Registered User
 
BYprodriver's Avatar
 
Join Date: Oct 2008
Location: O.C. CA
Posts: 3,709
Garage
I wish someone would come out with a lightweight clutch replacement for the stock Sachs.

The new Cayman GT4 has a "lightweight dual mass flywheel".
__________________
OE engine rebuilt,3.6 litre LN Engineering billet sleeves,triple row IMSB,LN rods. Deep sump oil pan with DT40 oil.
BYprodriver is offline   Reply With Quote
Old 04-03-2015, 01:02 PM   #18
Registered User
 
seningen's Avatar
 
Join Date: Jul 2008
Location: austin
Posts: 823
Quote:
Originally Posted by thstone View Post
I am up to about 62,000 miles and 94 track days and I am on the 2nd clutch (same LWFW) without a problem.

And as always, your mileage may vary.

Maybe I am lucky with clutches and unlucky with valve lifters.
Is your Sachs sport clutch spring loaded?

Which model?

I'm having the Ims done on my track S so I'm considering clutch options

Mike
__________________
Drivers: '15 Panamera Hybrid (wife's), ' 01 996 GT2, 00 Boxster S, '96 993 Çab/Tip (wife's)
Race Cars: '75 911 RSR Replica & '99 Spec Boxster
mike@lonestarrpm.com
seningen is offline   Reply With Quote
Old 04-03-2015, 01:51 PM   #19
Certified Boxster Addict
 
Join Date: Nov 2010
Location: Los Angeles
Posts: 7,669
Yes, the clutch disk is spring loaded.

Flywheel: AASCO Lightweight Flywheel PN 106412-11
Clutch disk: Sachs Performance Clutch PN 881861 000 017
Pressure Plate: Sachs Performance Sport Pressure Plate PN 88 3082 999 754

From our forum owner's website;
Pelican Parts.com - Lightweight Flywheels
Pelican Parts.com - Performance Clutches

Not sure if these parts will work on an S-model. Be sure to check before buying any parts!
__________________
1999 996 C2 - sold - bought back - sold for more
1997 Spec Boxster BSR #254
1979 911 SC
POC Licensed DE/TT Instructor
thstone is offline   Reply With Quote
Old 04-03-2015, 06:35 PM   #20
Registered User
 
Join Date: Nov 2014
Location: Santa Rosa, CA
Posts: 66
Quote:
Originally Posted by JFP in PA View Post
I think you are mistaking drivability and clutch noise with torsional harmonics. These engines are not particularly well balanced internally, which is why Porsche uses such a heavy two piece flywheel, the elastomer section absorbs those harmonics. Without the dual mass, they are left to their own devices.

We have seen a couple of these failures, Jake has an entire section of his site devoted to them. Porsche even released a TSB about not using single mass flywheels on these engine's, regardless of their weight.

Just food for thought.................

So how about lightening the stock dual mass flywheel a couple pounds?

Krieger is offline   Reply With Quote
Post Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 03:00 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page