Quote:
Originally Posted by deemce1
OK Blue,
I was out of town for the past 2 weeks so the replacement MAF sat in my mailbox. Just back today and installed. Started right up and idled great. After about 10 seconds, the idle jumped, then settled to normal. I assumed it was the CPU doing it's thing with new readings. Now just the CEL. It is on and I assume it will shut off after a few miles of driving with the new MAF?
I appreciate all the help and replies as now I am ready for some top down driving (if CEL resets). 
Thanks again,
Deemce (Dave) |
It may take few drive cycles for the CEL to turn off.
If you have an OBDII scanner you should be able to clear the codes that caused the CEL.
Or go to an auto parts store like Orielly's they have scanners to read customers codes and can possibly clear the codes for you.
Threaded Mode
