Go Back   986 Forum - The Community for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Boxster General Discussions

Post Reply
 
LinkBack Thread Tools Display Modes
Old 01-17-2020, 07:55 PM   #1
Registered User
 
Join Date: Apr 2011
Location: florida
Posts: 487
maytag I believe you also think that these cars dont cost any more to maintain than other cars as well. Well you are both wrong. Truth be told if you are watching dollars get another car! AND if I had a dollar for every post you were getting into it with someone I would buy another car. You seem to always be ass kissing someone on here and being an inflammatory F uck. How bout that for paraphrasing.I will tell you who was nice Pedro, is he on here anymore ? NO... because of you guys. I know because I asked him. I said before I should just stay off here But I for one am sick of you full time motor heads telling normal shmoes like me, that have a life ,that these cars are affordable to own especially if you wrench. You and Particle are FULL OF CRAP with way to many posts about an old car. Now I am out an off to drive one of my seven cars which I am sure I dont know how to maintain or the cost to do so. How much do all your f ucking tools cost D ICK. How much for a good torque wrench know it all?
nicecar is offline   Reply With Quote
Old 01-17-2020, 08:37 PM   #2
Motorist & Coffee Drinker
 
78F350's Avatar
 
Join Date: Jul 2014
Location: Oklahoma
Posts: 3,940
Garage
Quote:
Originally Posted by nicecar View Post
... How much for a good torque wrench know it all?
What makes it 'good'? How often should we calibrate them? Should I use a Stahlwille on my 46,000 mile '04 S SE and just use a HF $9.99 special on the 184,000 mile '97?

From testing and reviews I've seen, I'm happy to use the HF wrenches for a while, then just throw them away and get a new one rather than calibrate.


__________________
I am not an attorney, mechanic, or member of the clergy. Following any advice given in my posts is done at your own peril.

Last edited by 78F350; 01-17-2020 at 09:03 PM.
78F350 is offline   Reply With Quote
Old 01-18-2020, 05:30 AM   #3
1998 Boxster Silver/Red
 
Join Date: Sep 2017
Location: 92262
Posts: 3,087
Nicecar ****************ing rocking it! LOL!!!

Nice clever cuts... witty... sarcastic. I think I love him, but bet he's ugly as ****************.
__________________
1998 Porsche Boxster
Starter986 is offline   Reply With Quote
Old 01-17-2020, 09:28 PM   #4
Who's askin'?
 
maytag's Avatar
 
Join Date: Mar 2018
Location: Utah
Posts: 2,448
Quote:
Originally Posted by nicecar View Post
maytag I believe you also think that these cars dont cost any more to maintain than other cars as well. Well you are both wrong. Truth be told if you are watching dollars get another car! AND if I had a dollar for every post you were getting into it with someone I would buy another car. You seem to always be ass kissing someone on here and being an inflammatory F uck. How bout that for paraphrasing.I will tell you who was nice Pedro, is he on here anymore ? NO... because of you guys. I know because I asked him. I said before I should just stay off here But I for one am sick of you full time motor heads telling normal shmoes like me, that have a life ,that these cars are affordable to own especially if you wrench. You and Particle are FULL OF CRAP with way to many posts about an old car. Now I am out an off to drive one of my seven cars which I am sure I dont know how to maintain or the cost to do so. How much do all your f ucking tools cost D ICK. How much for a good torque wrench know it all?
Pal, I think you're right.... you need to take a break. 'Cuz you're seriously bent.

Just for starters, pedro was gone from here LONG before I came here. He and I are email friends (though he wouldn't probably know my forum name.... because we've never had occasion to discuss this forum.... since he was gone before I got here). So..... just from the start...... you're waaaaay off your rocker.

So relax a bit. Breathe. Come back when you're calmed abit. Or don't.

Sent from my SM-G970U using Tapatalk
maytag is offline   Reply With Quote
Old 01-17-2020, 09:31 PM   #5
Who's askin'?
 
maytag's Avatar
 
Join Date: Mar 2018
Location: Utah
Posts: 2,448
Ima delete this.... cuz I wanna be a nicer person, instead of funnier ..... so I don't continue to provoke mr. 7-cars.

Last edited by maytag; 01-17-2020 at 09:50 PM.
maytag is offline   Reply With Quote
Old 01-17-2020, 11:04 PM   #6
Registered User
 
Join Date: Jan 2020
Posts: 48
Quote:
Originally Posted by maytag View Post
Ima delete this.... cuz I wanna be a nicer person, instead of funnier ..... so I don't continue to provoke mr. 7-cars.

I saw it

I’m 50/50 on whether it should have stayed or not though
Russdawg1 is offline   Reply With Quote
Old 01-18-2020, 05:45 AM   #7
Registered User
 
piper6909's Avatar
 
Join Date: Jan 2019
Location: PA
Posts: 1,724
Quote:
Originally Posted by maytag View Post
Ima delete this.... cuz I wanna be a nicer person, instead of funnier ..... so I don't continue to provoke mr. 7-cars.
Let's step back here a little bit. Did nicecar go off the looney bin? Hell yeah! Probably off a night of drinking (just kidding) and he may wake up to regret it. Nonetheless there's no excuse for that just as there's no excuse for PW to personally attack him for providing his opinion. It's quite possible, although not the norm, that nicecar spends $2k/year, while PW only spends $2k/decade. That too is not the norm. It all depends on how much/little/hard/soft you drive it. Everyone has unique opinions based on unique EXPERIENCES. That is PRECISELY what makes these forums a wealth of information, and we shouldn't push people form contributing. I'd like to learn about nicecar's experiences as well as PW's, so I can make my own decision.

The problem is that there are a handful on here who are too quick to personally attack someone whose opinions/experiences are different than their own. State your case without getting so personal about it, and let the readers decide.

So let's not go around calling someone full of sh it if we don't agree with them, or question their personal/professional/mechanical experience if their views on an engine noise don't line up with ours. We should all be able to throw in our 2 cents without being personally attacked. We can have discussions, and explain why our opinion is different without resulting to personal attacks.

It's a sad day when I have to be the voice of decency and reason!

Last edited by piper6909; 01-18-2020 at 06:21 AM.
piper6909 is online now   Reply With Quote
Old 01-18-2020, 06:59 AM   #8
98 Arctic silver 986
 
tommy583's Avatar
 
Join Date: Jul 2011
Location: Upstate, NY
Posts: 1,452
Garage
Whoa this thread got off track. Bottom line is this. Drive some bases and drive some S's. Figure out what you prefer and go from there. It's just not worth it to change from a base to an S or from an automatic to a manual. So pick the model and transmission type you like and buy that.

As for maintenance costs they will vary. The better shape the car is, the less it will most likely cost you short term. Some years my car costs me only oil changes and whatever mods I decide to do. Other years it costs me much much more. Clutches are not cheap if you can't do them yourself. Tires are not exactly cheap. New glass window tops aren't cheap. I could probably use all new suspension again not cheap. The more you can do yourself the less money it will cost as long as you do it right.

I have probably spent more money on my car over the course of my ownership on mods and improvements that were not necessary to keep it drivable. On the other hand sometimes you have to spend some cash to keep it going. Remember these cars are at least 15 years plus at this point. Things wear out.

So in summary buy the best model you like at a price you can afford. Have some extra money set aside for unexpected repairs and or mods. Drive hard and be happy
tommy583 is offline   Reply With Quote
Old 01-18-2020, 07:10 AM   #9
Registered User
 
Join Date: Apr 2011
Location: florida
Posts: 487
here you go 986 Enjoy!

harbor freight ? no not drunk . I knew pedro left before maytag came, I said that people like maytag made him leave . 2 clutches ims 2 waterpumps entire front suspension aos and on and on. Some years nothing. Tools ,time ,parts, wax ,stereos etc add up quick. this is the only forum I have ever been on and learned very quick that a lot of crap was talked behind a keyboard so after I was told i was full of crap for opinion i decided to retreat. Then I said to my self....SELF! for once stand up to the guru with 6 million posts so here I am. Glad I could stir the pot! Sure beats the hell out of reading ANOTHER maytag post. I see he uses his phone to post so he makes sure he maintains his quota constantly.In closing keep telling yourself that these cars can not be a pain in the ass and expensive to keep on the road if you diy. Any car properly maintained mechanically and cosmetically costs money and time, the Porsche more than most if not all. Really this forum has helped so much with this car. It would be gone if not for the wealth of knowledge on here , but these opinions about tires ,oil and such...whatever. One other point I drive my car ALL year no bad weather ,could, this have something to do with cost because I actually drive rather than let it sit in the garage because I am repairing it when I get time or afraid to put mileage on it.
nicecar is offline   Reply With Quote
Old 01-18-2020, 08:01 AM   #10
2003 S, Arctic Silver, M6
 
paulofto's Avatar
 
Join Date: Oct 2014
Location: Winnipeg, MB, Canada
Posts: 1,346
Garage
Nicecar, of course you drive yours all year long. . . . . You live in Florida. Up here in the subarctic the car is hibernating 5 months of the year. I have a sport ute for those 5 months. And doing my own maintenance there is no way it is costing me $2K a year, even in Canadian loonies. In 7 years of ownership I have spent maybe $8k CDN and that includes a clutch, flywheel, IMS, RMS, new radiator, brake pads & fluid flushes, spark plugs, oil changes and a few paintless dent repairs. This is not only one of the easiest cars to work on but also no more expensive than any vehicle I have owned.

I have done work on this car that I would not even attempt on a front wheel drive transverse engined car.

And one more thing; guys like Maytag, PW, 78F350 and several others have contributed more knowledge and shared more successes to this forum than can be counted here. You on the other hand step in and berate them for what appears to be simply to talk s#it. and another thing . . . . Oh never mind it's not worth the time to type it....
paulofto is offline   Reply With Quote
Post Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 08:47 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page