Sun-visor Replacement

[aussieboxy]

Originally Posted by Cunningr

You have to buy a mirror assembly, they basically pop out but there are some wires inside so needs some soldering to be done right. Easily to take off the sun visor and work on a table. Remove 3 hex bolts but carefully.

Any idea where I can buy them?

[Subman]

I replaced my broken, lighted sun visor mirrors with unlighted mirrors from Auto Atlanta. Significantly cheaper, installation is literally a snap.

[BoxMann]

Originally Posted by Subman

I replaced my broken, lighted sun visor mirrors with unlighted mirrors from Auto Atlanta. Significantly cheaper, installation is literally a snap.

I'm tempted to do the same thing. I have to think long and hard to remember the last time I used and needed a lighted mirror there. (I don't put makeup on while I'm driving at night)

[Cunningr]

Originally Posted by aussieboxy

Any idea where I can buy them?

I ordered mine from ************************************************** ** I think, I will check the invoice I use several vendors, was about $70 I think. I-had to cut the wires in mine, and all the procedures I read said you need to desolder or cut. So I cut her wires then solder them back together put some heat shrink on the connection to finish. You need to be careful with the bolts though.