BRAN's - 986 - Seal Gray Anatomy

[BRAN]

Interesting...mine don't look that symmetrical...i will check the measurements on them and report back. Are both off, actually?
I am sure a modification can be done, should not be a show stopper.

[JBauer]

Originally Posted by BRAN

Interesting...mine don't look that symmetrical...i will check the measurements on them and report back. Are both off, actually?
I am sure a modification can be done, should not be a show stopper.

The ones off my convertible top bolt up perfectly. I'm nit sure they will work tho. Using them, with spinlocks engaged everything fits except windshield gap. Too far away to bolt on latch. Just by a bit.

[BRAN]

Originally Posted by JBauer

The ones off my convertible top bolt up perfectly. I'm nit sure they will work tho. Using them, with spinlocks engaged everything fits except windshield gap. Too far away to bolt on latch. Just by a bit.

you can bolt the latch on, right?

order to close:
1.) latch
2.) spinlocks

order to open:
1.) spinlocks
2.) latch

[JBauer]

Originally Posted by BRAN

Interesting...mine don't look that symmetrical...i will check the measurements on them and report back. Are both off, actually?
I am sure a modification can be done, should not be a show stopper.

Originally Posted by BRAN

you can bolt the latch on, right?

order to close:
1.) latch
2.) spinlocks

order to open:
1.) spinlocks
2.) latch

No I can't get the bolts in the latch if it in the slot or with bolted can't get latch in. That's both with spin locks unengaged. I haven't trim anything yet but I see nothing hitting to trim. Seems to fit fine. I've had it for today. I'll take some better pics and let you see what it looks like. Its odd it seemed to fit fine at all points until I put on the spinlocks.

Thanks for the help

[JBauer]

Update. I removed all hardware. Spinlock brackets, brackets that fit into the windshield frame holes and put the top on and the inside bracket fit fine. I'm going to start trimming at the contact points shown by marks in the fiberglass a little at a time to see if that help. I believe it's not able to go forward enough when clamped down. 🙄

[JBauer]

Got my feet wet today 🙄