'03 Side vent mod
OK, so far so good as one of the 4 photos I attempted to attach came through so if necessary I will do a single post on each of the next three.
What you are looking at is how I bent up and attached 1/4" galvanized hardware cloth ( actually steel) after spraying it flat grill black (Krylon). You will note the series of three ridges that I have cut out and ran my attaching wires under in order to keep it firmly in place. This is ala Grizzly who inspired me to do this mod. I also bought my '03s from the LA dismantlers that Grizz did. I will dig up the URL if you would like. For around $200 you can do this easy mod. Taking the vents off for cleaning de-snorking or whatever is a cinch since all you now do is remove the top screw and work the vent off as the two lower front tabs keep it in place and the screw holds the whole deal fast.
AKL
|
Threaded Mode
