Go Back   986 Forum - The Community for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Performance and Technical Chat

Post Reply
 
LinkBack Thread Tools Display Modes
Old 07-03-2020, 02:56 AM   #1
Registered User
 
truegearhead's Avatar
 
Join Date: Jul 2011
Location: Richmond, VA (The Fan)
Posts: 978
Quote:
Originally Posted by steved0x View Post
Nice, those are some nice looking wheels, what tires are you going to run on them? What is the widest 17" you can get?
Thanks, I’m putting on 315/35/17 Hoosiers today, and 245s in the front. Same setup I have on my 911, I’ll eventually need a wider front tire
__________________
1997 Boxster 4.2L Audi V8 Bi-Turbo
2003 911 C2
NASA HPDE Instructor
truegearhead is offline   Reply With Quote
Old 07-08-2020, 06:56 AM   #2
Registered User
 
steved0x's Avatar
 
Join Date: Dec 2012
Location: FL
Posts: 4,144
Quote:
Originally Posted by truegearhead View Post
Thanks, I’m putting on 315/35/17 Hoosiers today, and 245s in the front. Same setup I have on my 911, I’ll eventually need a wider front tire
That's a monster tire! I bet that is going to feel good!
steved0x is offline   Reply With Quote
Old 09-28-2020, 02:36 PM   #3
Registered User
 
truegearhead's Avatar
 
Join Date: Jul 2011
Location: Richmond, VA (The Fan)
Posts: 978
Well I've also had some enormous scope creep. I decided that lifting the car 2 feet off the ground to pull the engine from below is absurd and I don't have enough faith that I can service the Audi V8 with the factory engine cover in place so I did some cutting... I removed he entire engine surround and fire wall, rear trunk and moved all the electronics to the cabin I'll make an aluminum firewall that goes all the way to the roof and will either install a plexi window or install a hidefinition rear camera that uses the a rear view mirror as a screen (oddly the cheaper option). With the rear trunk removed I can now just wheel a new motor in instead of lifting the car up and pulling it from underneath (especially valuable with the tall V8 compared to the flat 6)






you can see in the above photo I'll need to add some rear chassis reinforcement, I'm going wait for the engine to go in and then tie something into the cage to strengthen it


I also added a third radiator that’ll sit under the hood scoop (feed from the front of the car and cut out the original rear quarter panels (that now sit under the widebody) to make room for...intercoolers


__________________
1997 Boxster 4.2L Audi V8 Bi-Turbo
2003 911 C2
NASA HPDE Instructor
truegearhead is offline   Reply With Quote
Post Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 09:41 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page