Go Back   986 Forum - The Community for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Performance and Technical Chat

Post Reply
 
LinkBack Thread Tools Display Modes
Old 08-02-2014, 08:31 AM   #1
Registered User
 
Join Date: Feb 2005
Location: It's a kind of magic.....
Posts: 6,615
Quote:
Originally Posted by 3_Angels View Post
Yikes! We want cooler oil, not hotter. I guess I thought that a remote oil cooler could be larger.
If you configured the car to run a remote oil cooler, it might, but most people (and correctly so) want to run the large "S" oil to water OEM cooler as it effectively cools the oil in the summer and warms it on cold starts in the winter, and it simply will not fit under the Boxster intake with that plate underneath it. And I have no idea where you would mount a remote oil cooler of any appreciable size on a street driven Boxster so that it could get ample air flow over it; there is little room at the rear of the car, and the front is too far away for the OEM oil pump to handle the load., which is why Porsche went with an oil to water cooler in the first place.
__________________
Anything really new is invented only in one’s youth. Later, one becomes more experienced, more famous – and more stupid.” - Albert Einstein
JFP in PA is online now   Reply With Quote
Old 08-07-2014, 06:37 PM   #2
Registered User
 
3_Angels's Avatar
 
Join Date: Mar 2014
Location: Albuquerque
Posts: 46
As you can see, there is very little room to work to install the DOF armored hose. I had to unplug the wiring for cylinder number six to have any chance of reasonable access. The reassembly of the 2002 Boxster S should go quickly now that the DOF hose is in place.
Attached Images
 
3_Angels is offline   Reply With Quote
Old 08-07-2014, 09:50 PM   #3
Registered User
 
3_Angels's Avatar
 
Join Date: Mar 2014
Location: Albuquerque
Posts: 46
DOF armored hose - route to driver or passenger?

The DOF armored hose will reach routing either up and down the driver's side as in A, or, more neatly up and over the intake manifold as in B. Does it make a difference, or is it just a choice? Up and over seems a bit neater with less hose flopping around.
Attached Images
 
3_Angels is offline   Reply With Quote
Old 08-08-2014, 07:57 AM   #4
Registered User
 
Join Date: May 2014
Location: S.California
Posts: 2,029
Over the top because it is less vulnerable there?
Gelbster is offline   Reply With Quote
Old 08-27-2014, 02:47 PM   #5
Registered User
 
3_Angels's Avatar
 
Join Date: Mar 2014
Location: Albuquerque
Posts: 46
Car reassembled last night. Transmission shifting smoothly and confidently. Second gear seems rock solid on both max acceleration and deceleration. My fingers are crossed, but there seems to be no evidence of any transmission issue!

The DOF IMS bearing tubing connection on the top of the engine was difficult to tighten with my regular wrenches. I purchased a set of SAE flare nut crowfoot wrenches, and easily tightened the connection with the 7/16 inch wrench.
3_Angels is offline   Reply With Quote
Old 08-27-2014, 06:52 PM   #6
Registered User
 
Join Date: May 2014
Location: S.California
Posts: 2,029
Very impressed.I hope you'll give us updates .You addressed two issues that otherwise doom these cars to the status(& value) of Triumph Stags/Spitfires
Gelbster is offline   Reply With Quote
Old 08-27-2014, 08:01 PM   #7
Registered User
 
Pdwight's Avatar
 
Join Date: May 2013
Location: North Alabama
Posts: 2,079
Not to mention

I had a Buddy who had a 04 911, engine started knocking and he let it go for 13K...and the car was Cherry...it got away before I had a chance to even talk to him.....traded it for a Elise and got 13K in trade....which means he let it go for probably 6K.......sad
Pdwight is offline   Reply With Quote
Post Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 02:25 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page