Key hard to turn in ignition

[san rensho]

Do I have to re-key after I change the cylinder? My understanding that is big bucks at the dealer.

[Spinnaker]

See if this older post is any help. Worth a try before spending the big bucks for a new switch assembly.

http://986forum.com/forums/general-discussions/36472-ignition-switch-acting-up.html

[barkinfool]

I believe you might find that simply changing the ignition switch for <$15 might be a great first step to see if this fixes the issue. If you search ignition switch you will find many discussions of this part that commonly fails. You likely won't have to replace the whole mechanism if you start with the switch only. Worth the effort first IMO.

[Meir]

Originally Posted by san rensho

Do I have to re-key after I change the cylinder? My understanding that is big bucks at the dealer.

For my understanding, the mechanism comes without the key portion, and you need to use the old part, that matches your existing key.
I'm posting this from my iPad, so I can't show a picture, but if you will look at the part, you will understand what I mean.

[Meir]

got some pics for you.
the assembly with the key on it.



the new assembly without the key portion.





looks like you need to lift the two tabs, and move the key portion from old to new assembly.