IMS Guardian

[JFP in PA]

A very small bead is all that is required, too much and you get the squeeze out that causes problems...........

[Bala]

Originally Posted by JFP in PA

A very small bead is all that is required, too much and you get the squeeze out that causes problems...........

But, I don't get the point in putting a small bead. Shouldn't the seal be all around the joint and not just a few beads in a few places?

Anticipating the squeeze out I put the seal on the outer most edge of the bottom pan. I let it dry for over a day. Still the possibility of an issue?