Go Back   986 Forum - The Community for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Performance and Technical Chat

Post Reply
 
LinkBack Thread Tools Display Modes
Old 06-04-2011, 06:12 PM   #1
Registered User
 
Join Date: Apr 2011
Location: Bay Area
Posts: 90
Yes, it will move freely without engaging the clutch. It is like there is no gears to choose. Really odd..
rdougan is offline   Reply With Quote
Old 06-04-2011, 06:30 PM   #2
Registered User
 
Jager's Avatar
 
Join Date: Jul 2010
Location: California
Posts: 1,859
Garage
What you’re describing it seems your linkage cables got disconnected, at the shifter or at the transmission??
Jager is online now   Reply With Quote
Old 06-04-2011, 06:31 PM   #3
Registered User
 
Join Date: Apr 2011
Location: Bay Area
Posts: 90
Thought it was something like that. How hard is it to remove the center console? I can't seem to find any information/tutorials showing you how to do it.
rdougan is offline   Reply With Quote
Old 06-04-2011, 06:48 PM   #4
Registered User
 
Jager's Avatar
 
Join Date: Jul 2010
Location: California
Posts: 1,859
Garage
I have not opened my console but I know other members of this forum have, maybe someone will chime-in.

I would get underneath the vehicle and look at the transmission end of the cables while having a friend move the shifter. There is a great picture on this thread: [url]http://986forum.com/forums/showthread.php?t=28990[url] showing the ends of the cables that connect to the transmission linkage. See if you have movement there or if the cables are disconnected.
Jager is online now   Reply With Quote
Old 06-04-2011, 07:15 PM   #5
Registered User
 
Join Date: Apr 2011
Location: Bay Area
Posts: 90
After checking again, it seems to go into 3rd, 4th, 5th and 6th. Going near the left (1,2,R) is very "loose".

Where is that part located? Think I can get access to it without jacking the car?
rdougan is offline   Reply With Quote
Old 06-04-2011, 11:32 PM   #6
Registered User
 
Jager's Avatar
 
Join Date: Jul 2010
Location: California
Posts: 1,859
Garage
I have worked on the linkage only while under the vehicle. You might be able to get to the transmission linkage if you remove the rear passenger side wheel, I'm not sure, but in either case you will have to raise the vehicle.
Jager is online now   Reply With Quote
Old 06-05-2011, 12:59 PM   #7
Registered User
 
Join Date: Apr 2011
Location: Bay Area
Posts: 90
Ok, bought a jack today and took a look:



It seems that the bottom most one is out of place. I tried quickly putting it back in, but it is awkward to get at. Any tips?

Also, Is it as simple as that? The top most one seems to have a loose washer as well. Issue?
rdougan is offline   Reply With Quote
Post Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 11:54 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page