Go Back   986 Forum - The Community for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Performance and Technical Chat

Post Reply
 
LinkBack Thread Tools Display Modes
Old 05-15-2011, 07:21 PM   #1
Registered User
 
Join Date: Jan 2007
Location: Depends on the day of the week....
Posts: 1,400
The RoW M030 sits lower than the US cars do, and is sprung stiffer and more damped. I had installed this setup on my 02 S (which comes with springs, dampers, and sways) and it was an extremely well balanced car with it installed.

If you want to raise the ride height, just swap out the springs. However, depending upon your mileage, it may make sense to replace the dampers as well.
__________________
Boxster S
Cloudsurfer is offline   Reply With Quote
Old 05-16-2011, 06:38 AM   #2
Registered User
 
jaykay's Avatar
 
Join Date: Sep 2009
Location: toronto
Posts: 2,668
I have always wanted to know of anyone's experience with RoW M030 package and swapping out the RoW M030 springs for ones that give a slightly lower stance....perhaps H and R.

I would hate to mess with a good set up but would like the look of the lower ride height
__________________
986 00S
jaykay is offline   Reply With Quote
Post Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 10:40 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page