Go Back   986 Forum - The Community for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Performance and Technical Chat

Post Reply
 
LinkBack Thread Tools Display Modes
Old 11-21-2007, 01:36 PM   #1
Registered User
 
Join Date: Nov 2006
Location: Virginia
Posts: 846
Quote:
Originally Posted by mtch
Speaking of DE's, is anyone having trouble with the convertible top / roll bar / broomstick test? The 987 has an improved roll bar, but I'm working with a 986 right now and I've run into problems. Some regions communicate inconsistant info regarding the roll bar requirements. It's getting to the point that I'll only attend DE's with my local because you never know if you'll get to run until you show up for tech inspection.
That's another weak spot.. can vary with the regions AND the tracks.

For instance, VIR requires a BK Bar on all 986 Boxsters regardless of meeting the broomstick test without one

Some regions don't care.. Others mandate the BK bar.. Others "substitute" the BK bar for the Hardtop. I had this problem last spring. My local region said either BK or Hardtop. Another region that ran at my local track required the BK bar, whether a hardtop was installed or not. Then, other clubs don't even care about the "brookstick" test.

In the end, its your head and neck that will take the beating should something bad happen. How much is that worth to you? I found a used BK bar for about $350 and didn't look back, since that met a "minimum" for both the clubs and tracks I wanted to run at and was much cheaper than a Hardtop and frankly, I didn't view a hardtop as a strong structural element in case of roll-over.
__________________
1976 914 2.0
2000 Boxster 2.7 (sold)
1978 911 SC (sold)
1970 914 w/2056 (sold)
racer_d is offline   Reply With Quote
Post Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 06:22 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page