Go Back   986 Forum - The Community for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > DIY Project Guides

 
 
LinkBack Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 01-06-2021, 05:10 PM   #11
Registered User
 
djw8282's Avatar
 
Join Date: Sep 2010
Location: Orlando/NY
Posts: 143
Hello 78F350,

Good timing. This is my next step. After doing some research, I think my problem is the cables that connect to the top motor and trans. I hear a power/clicking sound from the motor. Did some research on the board and saw Maurice (Schoir) pinpointes this area with a possible faulty cable with a power sound and no top movement. Maurice has been awesome over the years with advice.

My question is this, with the top down, I'm not sure if I can reach those clips. I should be able to pop the ball joint or get to that 19mm bolt?

Last edited by djw8282; 01-06-2021 at 05:12 PM.
djw8282 is offline   Reply With Quote
 

Tags
convertible , manual , roof , stuck , top



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 03:06 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page