Porsche Wind Deflector with Edge Lighting [from CAD, prototyping to finish]

[Dave80GTSi]

Fred - Interested in this product, but strictly speaking only for myself (and realizing that I may well be in the minority here), I am not a fan of the concept of the LED lighting bit.

Wondering if it is possible to do the screen w/o the lighting, but only an 'etching' of the clear screen so that the logo bit is visible? In other words, the appearance should be about the same as the lighted version would be with the lighting not turned on?

Thanks - DM

[particlewave]

Originally Posted by Dave80GTSi

Fred - Interested in this product, but strictly speaking only for myself (and realizing that I may well be in the minority here), I am not a fan of the concept of the LED lighting bit.

Wondering if it is possible to do the screen w/o the lighting, but only an 'etching' of the clear screen so that the logo bit is visible? In other words, the appearance should be about the same as the lighted version would be with the lighting not turned on?

Thanks - DM

Mine is off 99% of the time (brightness is adjustable).
I only use the lighting when showing off

It’s technically illegal to drive with it on, anyway.

[Nine8Six]

Originally Posted by Dave80GTSi

Fred - Interested in this product, but strictly speaking only for myself (and realizing that I may well be in the minority here), I am not a fan of the concept of the LED lighting bit.

Wondering if it is possible to do the screen w/o the lighting, but only an 'etching' of the clear screen so that the logo bit is visible? In other words, the appearance should be about the same as the lighted version would be with the lighting not turned on?

Thanks - DM

Dave, absolutely.
I'd be more than happy to get you an exact replica of the existing panel with a quality etch of your choice at a reasonable price. That without any illumination or additional hardware as you request (i.e. just the panel & etch job).

If you are happy with this let us know here on the thread and I'll put you in. The more we are for the panel min.qty order & coating the better! (supplier/coater won't budge under 50x (min.qty) and I don't want all that extra to be on "my tab" lol

[Dave80GTSi]

Originally Posted by Nine8Six

Dave, absolutely.
I'd be more than happy to get you an exact replica of the existing panel with a quality etch of your choice at a reasonable price. That without any illumination or additional hardware as you request (i.e. just the panel & etch job).

If you are happy with this let us know here on the thread and I'll put you in. The more we are for the panel min.qty order & coating the better! (supplier/coater won't budge under 50x (min.qty) and I don't want all that extra to be on "my tab" lol

Yes, that sounds good! Count me in!

Thanks - DM

[Nine8Six]

Originally Posted by Dave80GTSi

Yes, that sounds good! Count me in!

Thanks - DM

Welcome to the SkyBreaker Club!
Dave80GTSi, Starter986, TTGator, robdelorenzo, Kboggs, Dubaday, maytag, bg305, Troy.Boxster, rick3000, Bran, Jeffrey

I'll PM everyone as soon as I possibly can guys. Let's e-upgrade this first, get the panels to the Coating Mfg next (arrgg), and let's go crazy and etch those last. Thanks again everyone. Enjoy the weekend!