|
There should be no debris in the projectors. I wasn't careful enough during my installation and got dust inside one of them. You can remove the inside screws to get it apart and very carefully clean the inside. Getting the screws back in can apparently be a PITA, although I found it easy.
I did not have the angel eye option. The solenoid wires (and presumably the angel eye wires) go thru the little rectangular opening under the projector, shown on page 17 and 18 of the instructions.
My kit did not have the wires you show.
__________________
2001 Boxster, 5 spd, Seal Grey
|
Threaded Mode
