Quote:
Originally Posted by BFeller
My kit arrived on just the other day. The lights are installed in the housings. Next step is figuring out the wiring, mounting the Ballasts, checking the aim and then sealing them back up.
|
Take a look at my retrofit thread. I still have not finished it, but there are some good pictures in there.
For nice and clean install of the ballast, you'll want a 1" holesaw and some 1" hole plugs from the hardware store.
1" is the perfect size to allow all the connectors to pass through the rear cover in case you need to replace the ballast down the road.
Threaded Mode
