03-30-2017, 02:32 AM
|
#141
|
|
Registered User
Join Date: May 2016
Posts: 115
|
Quote:
Originally Posted by particlewave
Yes. Green wire to top right pin, orange wire to switched 12V+.
Tapping the green wire to that pin will dim the DRLs when the headlight switch is in any on position (parking lights or headlights on). Tapping it into the yellow/black wire that you already tapped will dim them only when the headlights are on (DRLs at 100% with headlight switch off or in parking light position).
If you're still not getting 12V+ on the yellow/black wire (bottom right pin), then your fuse is probably blown again.
|
Thank you again Charles. (may I call you that?)
|
|
|
|
03-30-2017, 05:22 PM
|
#142
|
|
Custom User Title Here
Join Date: Mar 2012
Location: Ft. Leonard Wood
Posts: 6,164
|
No problem and of course 
|
|
|
|
|
03-31-2017, 12:43 AM
|
#143
|
|
Registered User
Join Date: May 2016
Posts: 115
|
Btw Particlewave and Oldskool... I got the lights I installed a few days ago working. You guys were right. The diagram sent with the relay was wrong. As soon as I reversed those black wires it worked fine. Anyhow, I've a better set on the way.
Sent from my SM-G928F using Tapatalk
|
|
|
|
|
03-31-2017, 09:53 PM
|
#144
|
|
Custom User Title Here
Join Date: Mar 2012
Location: Ft. Leonard Wood
Posts: 6,164
|
Quote:
Originally Posted by itskenallen
Btw Particlewave and Oldskool... I got the lights I installed a few days ago working. You guys were right. The diagram sent with the relay was wrong. As soon as I reversed those black wires it worked fine. Anyhow, I've a better set on the way.
Sent from my SM-G928F using Tapatalk
|
I can't say that I'm shocked that it was mislabeled. 
|
|
|
|
|
04-01-2017, 01:06 PM
|
#145
|
|
Registered User
Join Date: Mar 2017
Location: UK
Posts: 12
|
Quote:
Originally Posted by particlewave
And do this... 
 |
Hi particlewave, I did this today. A straight forward job took 15 minutes at most with great results.
Drove the car for about half an hour and the lens where the fog light is, did not get warm at all. Looks like the led put out very little heat if any.
Thanks again.
|
|
|
|
|
04-01-2017, 01:43 PM
|
#146
|
|
Registered User
Join Date: May 2016
Posts: 115
|
Quote:
Originally Posted by kallie
Hi particlewave, I did this today. A straight forward job took 15 minutes at most with great results.
Drove the car for about half an hour and the lens where the fog light is, did not get warm at all. Looks like the led put out very little heat if any.
Thanks again. |
Good stuff.. Great to hear we've another option over this side of the Atlantic.
Sent from my SM-G928F using Tapatalk
|
|
|
|
|
04-02-2017, 12:48 AM
|
#147
|
|
Custom User Title Here
Join Date: Mar 2012
Location: Ft. Leonard Wood
Posts: 6,164
|
Quote:
Originally Posted by kallie
Hi particlewave, I did this today. A straight forward job took 15 minutes at most with great results.
Drove the car for about half an hour and the lens where the fog light is, did not get warm at all. Looks like the led put out very little heat if any.
Thanks again. |
Nice work! Glad to help
|
|
|
|
|
06-05-2017, 08:38 PM
|
#148
|
|
Registered User
Join Date: Jun 2014
Location: Dacula, Georgia
Posts: 264
|
So, I was thinking if the city/parking lights can be used the same way? Haven't checked to see if there is a relay for city/parking lamps, does anyone know?
|
|
|
|
|
06-05-2017, 09:15 PM
|
#149
|
|
Custom User Title Here
Join Date: Mar 2012
Location: Ft. Leonard Wood
Posts: 6,164
|
No relay and they aren't very bright. 
|
|
|
|
|
06-06-2017, 04:53 AM
|
#150
|
|
Registered User
Join Date: Jun 2014
Location: Dacula, Georgia
Posts: 264
|
Boo, thanks Particle!!!
|
|
|
|
|
07-05-2017, 05:49 AM
|
#151
|
|
Registered User
Join Date: Jun 2014
Location: Dacula, Georgia
Posts: 264
|
BTW, if no fuse taps then you can easily take 16-18g wire, strip both ends and then wrap one end around one blade of the fuse and then take the other end and wrap around the 86 relay terminal. This is the way I have mine setup.
|
|
|
|
|
07-05-2017, 05:55 AM
|
#152
|
|
Registered User
Join Date: Jun 2014
Location: Dacula, Georgia
Posts: 264
|
I just did this hack and purchased 2 LED H7s. I was adjusting my headlights after a HID projector retrofit and noticed after about 20 minutes and the car on in the garage, that my LED bulbs begin to flash alternately. I'm pretty sure that means I need a capacitor on each LED, but was wondering because other than one post in March of this year, I didn't see anyone speaking of this. Decided to undo the hack and put regular halogens back in for fogs.
|
|
|
|
|
07-05-2017, 05:55 AM
|
#153
|
|
Registered User
Join Date: Sep 2016
Location: Stow, MA
Posts: 918
|
Quote:
Originally Posted by redciv1
BTW, if no fuse taps then you can easily take 16-18g wire, strip both ends and then wrap one end around one blade of the fuse and then take the other end and wrap around the 86 relay terminal. This is the way I have mine setup.
|
Not a good idea. If you make the connection on one fuse leg the fog leg connection will be unfused and if do it on the other the fuse risks being overloaded when you turn the headlights on. Good fuse taps have a fuse on the tap. They are inexpensive and easy to order from Amazon.
__________________
2004 Boxster S Silver - FUNTOY
2002 Boxster Base Guardsy Red - FUNBOX
1987 Caterham Super 7 1700 Supersprint
2009 Mercedes Benz CLK 350 convertible
1941 Dodge Luxury Liner Coupe
|
|
|
|
|
07-05-2017, 08:24 AM
|
#154
|
|
Registered User
Join Date: Oct 2014
Location: Peterborough Ontario Canada
Posts: 148
|
My car must be unique. No DRL fog light hack needed. I replaced my fog light bulbs with led's and just leave my fog lights switched on. They turn on when the key is turned on, and off when the car is shut off. They also switch off when my high beams are on.
__________________
1999 Boxster, Ocean Blue Metallic-grey top.
LN IMS dual row-, Ben's short shift kit
Last edited by pilut2; 07-05-2017 at 10:24 AM.
|
|
|
|
|
07-05-2017, 08:31 AM
|
#155
|
|
Registered User
Join Date: Jun 2014
Location: Dacula, Georgia
Posts: 264
|
Quote:
Originally Posted by Anker
Not a good idea. If you make the connection on one fuse leg the fog leg connection will be unfused and if do it on the other the fuse risks being overloaded when you turn the headlights on. Good fuse taps have a fuse on the tap. They are inexpensive and easy to order from Amazon.
|
Good info Anker
|
|
|
|
|
07-05-2017, 01:42 PM
|
#156
|
|
On the slippery slope
Join Date: Mar 2014
Location: Austin and Palm Springs
Posts: 3,796
|
Quote:
Originally Posted by pilut2
My car must be unique. No DRL fog light hack needed. I replaced my fog light bulbs with led's and just leave my fog lights switched on. They turn on when the key is turned on, and off when the car is shut off. They also switch off when my high beams are on.
|
In Canada, the cars have DRL from the factory
__________________
2004 Boxster S 6 speed - DRL relay hack, Polaris AutoTop DIY
2004 996 Targa Tip
Instructor - San Diego region
2014 Porsche Performance Driving School
2020 BMW X3, 2013 Ram 1500, 2016 Cmax, 2004 F-150 "Big Red"
|
|
|
|
07-05-2017, 03:17 PM
|
#157
|
|
Registered User
Join Date: Jun 2012
Location: Bedford, TX
Posts: 2,731
|
I finally got around to doing mine. I bought the fuse taps at Autozone for all of $1.99, I already had some wire. I have no idea why it took me so long, it works great!
__________________
______________________________________________
2001 Boxster S Lapis Blue
TS Cat Bypass Pipes and exhaust
iPad Mini Dash Install
DEPO Tail Lights
|
|
|
|
|
07-05-2017, 03:31 PM
|
#158
|
|
Custom User Title Here
Join Date: Mar 2012
Location: Ft. Leonard Wood
Posts: 6,164
|
Looks great with those headlights, Bruce! 
I've gotta say, with all of the headlights that I built, I've always liked the look of yours the best. They're so clear and clean, and go really well with your car color.
|
|
|
|
|
07-05-2017, 03:40 PM
|
#159
|
|
Registered User
Join Date: Jun 2012
Location: Bedford, TX
Posts: 2,731
|
Quote:
Originally Posted by particlewave
Looks great with those headlights, Bruce!
I've gotta say, with all of the headlights that I built, I've always liked the look of yours the best. They're so clear and clean, and go really well with your car color. |
Thanks Charles! I'm very happy as well, you and Fred make a great team
__________________
______________________________________________
2001 Boxster S Lapis Blue
TS Cat Bypass Pipes and exhaust
iPad Mini Dash Install
DEPO Tail Lights
|
|
|
|
|
07-05-2017, 08:21 PM
|
#160
|
|
Registered User
Join Date: Jun 2012
Location: Bedford, TX
Posts: 2,731
|
__________________
______________________________________________
2001 Boxster S Lapis Blue
TS Cat Bypass Pipes and exhaust
iPad Mini Dash Install
DEPO Tail Lights
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is On
|
|
|
All times are GMT -8. The time now is 12:39 AM.
| |
FunToy
Boxster
2004 Porsche Boxster S
2004 Porsche 996 Targa
2001 Boxster S
Linear Mode
