refurbishing wheel caps

[t2-bxtrs]

folks,
i'm sure somebody already had tackle this project before? my wheel caps are faded and not sure to go about it safely.. much appreciated..
thank you

Heck, buy one of these options, and be done with it in a matter of minutes:

http://e-partssales.com/Merchant2/merchant.mvc?Screen=CTGY&Store_Code=P&Category_Code=986CenterCaps

[t2-bxtrs]

there we go.. easy replacement.
thank u

I say buy the "turbo" caps!



I guy can dream......can't he?

[Rareair]

My emblems started to look dingy with a milky White layer of film. I rubbed them out with some wet/dry 2000 grit sandpaper, followed by an application of 3M polishing compound by hand. They look good as new.

[MidMotor2TrunkToter]

I did the same thing as Rareair and it works. Started with 1500 grit wet dry sandpaper and then finished with 2000 grit. For good measure I shot them with 3 light coats of wheel clearcoar (duplicolor in the spray can form Autozone). They look good as new and I saved some $.