Go Back   986 Forum - The Community for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Boxster Racing Forum

Post Reply
 
LinkBack Thread Tools Display Modes
Old 03-05-2018, 01:43 PM   #1
Registered User
 
rastta's Avatar
 
Join Date: Feb 2014
Location: Cowtown CA
Posts: 369
You can also throw top camber plates on that add 1 degree. That will get you 3.
rastta is offline   Reply With Quote
Old 03-05-2018, 04:27 PM   #2
Registered User
 
AZ986S's Avatar
 
Join Date: Jun 2016
Location: Arizona
Posts: 379
Quote:
Originally Posted by rastta View Post
You can also throw top camber plates on that add 1 degree. That will get you 3.
That's going to be my next project. I might wait until I have to replace the front struts, but that may take a while I had the same issue, the strut mount body hits the inside of the sheet metal strut housing. I took a look in there and there is not much metal to grind away and it could weaken the mount.

__________________
2002 Boxster S - NHP 200 Cell Headers,test pipes,Borla CatBack,Competition Plenum,74 mm TB, EVOMS Tune,Tarett UDP,Eibach Swaybars,BIlstein PSS9s,TuneRS rear toe links,wheel studs,15 mm wheel spacers on all 4,EBC yellow stuff pads,Sebro rotors, EBS oil baffles,160 deg Thermostat,2 quart Accusump,full filtration remote oil filter,rad fan switch,custom gauge/switch plate, Race Capture data logging, 90K miles
AZ986S is offline   Reply With Quote
Old 03-06-2018, 05:45 AM   #3
Registered User
 
rastta's Avatar
 
Join Date: Feb 2014
Location: Cowtown CA
Posts: 369
Quote:
Originally Posted by AZ986S View Post
That's going to be my next project. I might wait until I have to replace the front struts, but that may take a while I had the same issue, the strut mount body hits the inside of the sheet metal strut housing. I took a look in there and there is not much metal to grind away and it could weaken the mount.
Yeah, I wouldn't mess with the top mount. I'm having Ohlins R+T coilovers installed in my Cayman. I debated about putting camber mounts in - but since it's a street car I went with the stock mounts.
rastta is offline   Reply With Quote
Post Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 06:39 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page