Black Spec Boxster Build

[Gary R.]

Originally Posted by roocox@gmail.com

Window glass and regulators removed. Next, I'll pull the wiring and cut off the extra metal in the door panels. Dash is ready to pull, except for the one t20 bolt that my short bit can't reach inside the headlight switch/knob. I do have a long bit, but that's for something else.

Thanks for reminding me to order a manual for my 97, found it on CD for $7.95 on Ebay.. hopefully it's good, worst case I can get the paperback Bentley for $75 or so.

[roocox@gmail.com]

Dash is out! Ignition housing is out, now I've got to cut off the steering lock. FYI, I found that removing the ignition housing requires depressing this little nub. It took me a little while to figure that out.

After steering lock removal and possibly updating the ignition housing with the newer version, it's time for wiring clean-up (nightmare) as the cage is likely going in next.